Description
Avery MPI2528 Perforated Window 50/50
Avery Dennison®
MPI 2528 Perforated
50/50
Permanent StaFlat
(formerly: MPI 4002)
Revision: 7 Dated: 11/15/16
Product Data Sheet
Page 1 of 3
[email protected]
Customer Service: 800-282-8379
Uses:
Avery Dennison® HP MPI 2528 Perforated
Window Film 50/50 is a perforated flexible
calendered film for use on exterior-mount
one-way visual panels. Graphics printed on
this material are visible from the front and
invisible from the back when mounted on
windows. HP MPI 2528s 50/50 perforation
pattern provides an open area of 50%
allowing for the best possible visibility
through a one-way graphic panel. This film
is intended for vehicle windows or
applications where visibility through the
graphic is important.
Face: 7 mil (178 microns) matte white
calendered
Adhesive: Black Removable Acrylic
Liner: 90# StaFlat with clear back
laminate
Durability: Up to 3 years (unprinted)
Application
Surfaces:
Flat, simple curves
Features:
One-way visibility for window applications
50/50 hole pattern allows visibility for vehicle graphics
1.5 mil hole provides light transmission
Great image clarity and color pop
Provides up to 50% reduction of indoor solar heat gain for window applications
Conversion:
Flat Bed Sign-Cut
Drum Roller Sign-Cut
Steel Rule Die-Cutting
Solvent based inkjet
Mild/Eco Solvent inkjet
Common Applications:
Stationary Windows Vehicle Windows
Avery Dennison®
MPI 2528 Perforated
50/50
Permanent StaFlat
(formerly: MPI 4002)
Revision: 7 Dated: 11/15/16
Product Data Sheet
Page 2 of 3
[email protected]
Customer Service: 800-282-8379
Physical Characteristics:
Property Typical Values
Caliper, face 7 mil (178µm)
Caliper, adhesive 1.0mil (25 µm)
Dimensional
stability
<0.03 (0.76mm)
Note: Ink loads in excess of 250%
may cause increased shrinkage of
the printed film.
Tensile at Yield N/A
Elongation N/A
Gloss N/A
Gloss N/A
Adhesion: 15 min. Removable 4.0 lbs/in (700 N/m)
Flammability Self Extinguishing
Shelf-Life 1 year
when stored at the following
temperatures and humidity conditions
68°-77° F (20° - 25° C) and 50±5%
R. H.
Durability Vertical
Exposure
Unprinted 3 years
Printed Up to 1 year
Min. Application
Temperature
50° F (10° C)
Service
Temperature
-50° to 180°F (-45° to 82°
C) (Reasonable range of
temperatures which would be
expected under normal environmental
conditions).
Chemical
resistance
Resistant to most mild
acids, alkalis, and salt
solutions.
Data represents average values where applicable, and is not
intended for specification purposes.
Warranty:
This Warranty applies to the Product listed in this Data
Sheet. All statements, technical information (including
physical and chemical characteristics) and
recommendations about Avery Dennison products are
based upon tests believed to be reliable but do not
constitute a guarantee or warranty. All Avery Dennison
products are sold subject to the Purchasers assent and
agreement that Purchaser is responsible for, and has
independently determined, the suitability of such products
for its purposes or its customers purposes. Avery
Dennison graphics products are warranted to be free from
defects in material and workmanship for two years from
the date of manufacture. When the product is properly
applied, the warranty period is as stated in the product's
specific Product Data Sheet in effect at the time of
shipment to Avery Dennison's customer.
Such time periods are subject in either case to the proper
storing and application of said product, and the failure to
properly store or apply the product, including without
limitation the failure to follow any applicable Instructional
Bulletin, negates any warranty. It is expressly agreed and
understood that Avery Dennison's sole obligation and
Purchaser's exclusive remedy under this warranty, under
any other warranty, express or implied, or otherwise, shall
be limited exclusively to: (a) repair or replacement of
defective product without charge at Avery Dennison's plant
or at the location of the product (at Avery Dennison's
election), or (b) in the event repair or replacement are not
commercially practical, a credit amount up to the price of
the product taking into account the defect in the product in
Avery Dennisons sole discretion.
THE WARRANTY EXPRESSLY SET FORTH ABOVE IS
IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR
IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY
IMPLIED WARRANTIES OF MERCHANTABILITY,
FITNESS FOR ANY PARTICULAR USE AND/OR NONINFRINGEMENT. SELLER SPECIFICALLY DISCLAIMS
AND EXCLUDES ALL OTHER SUCH WARRANTIES. NO
WAIVER, ALTERATION, ADDITION OR MODIFICATION
OF THE FOREGOING CONDITIONS SHALL BE VALID
UNLESS MADE IN WRITING AND MANUALLY SIGNED
BY AN OFFICER OF AVERY DENNISON.
AVERY DENNISON'S LIABILITY FOR DEFECTIVE
PRODUCTS SHALL NOT EXCEED THE PURCHASE
PRICE PAID THEREFORE BY PURCHASER AND IN NO
EVENT SHALL AVERY DENNISON BE RESPONSIBLE
FOR ANY INCIDENTAL OR CONSEQUENTIAL
DAMAGES WHETHER FORESEEABLE OR NOT,
CAUSED BY DEFECTS IN SUCH PRODUCT, WHETHER
SUCH DAMAGE OCCURS OR IS DISCOVERED
BEFORE OR AFTER REPLACEMENT OR CREDIT, AND
WHETHER OR NOT SUCH DAMAGE IS CAUSED BY
AVERY DENNISON'S NEGLIGENCE.
All sales and contracts for sale of Products are subject to
Purchasers assent and agreement to this Warranty.
Avery Dennison hereby objects to any terms or conditions
contained in any purchase order or other communication of
any kind from the Purchaser that is conflicting, inconsistent
or additional to this Agreement.
Avery Dennison®
MPI 2528 Perforated
50/50
Permanent StaFlat
(formerly: MPI 4002)
Revision: 7 Dated: 11/15/16
Product Data Sheet
Page 3 of 3
[email protected]
Customer Service: 800-282-8379
Dimensional stability:
Is measured on a 6 x 6 (150 x 150 mm) aluminum panel to which a specimen has been applied; 72 hours after
application the panel is scored in a cross pattern, exposed for 48 hours to 150°F (65°C), after which the shrinkage is
measured.
Adhesion:
(FTM-1, FINAT) is measured by peeling a specimen at a 180° angle from a stainless steel panel, 24 hours after the
specimen has been applied under standardized conditions. Initial adhesion is measured 15 minutes after application of
the specimen.
Flammability:
A specimen applied to aluminum is subjected to the flame of a gas burner for 15 seconds. The film should stop burning
within 15 seconds after removal from the flame.
Temperature range:
A specimen applied to stainless steel is exposed at high and low temperatures and brought back to room temperature. 1
hour after exposure the specimen is examined for any deterioration. Note: Prolonged exposure to high and low
temperatures in the presence of chemicals such as solvents, acids, dyes, etc. may eventually cause deterioration.
Chemical Resistance:
All chemical tests are conducted with test panels to which a specimen has been applied 72 hours after application the
panels are immersed in the test fluid for the given test period. 1 hour after removing the panel from the fluid, the specimen
is examined for any deterioration.
Special Considerations:
Because of the unique properties and varieties of glass, special considerations must be considered for windows and
graphic applications. Avery Dennison® accepts no liability for glass breakage.
Glass absorbs heat when exposed to sunlight. The degree of absorption across windows can vary because of
shading, heating, and cooling ventilation, and insulation from window frames. These temperature differences across
the window produce stress, which can cause glass breakage. The ability of glass to resist breakage because of
temperature stress is affected by window size, glass thickness, glass treatments, quality, and design.
Window cleaning methods also vary, from the type of cleaners used, to the washing methods employed. Specific
chemicals used in window cleaners may affect the adhesion of pressure-sensitive graphics. Power washing
methods may impact the adhesion of graphics, if the water pressure or temperature exceeds the graphics adhesion
capability.
Revisions are italicized
Avery Dennison is a registered trademark of Avery Dennison Corp.
T MPI2528 Perforated Window 50/50
Stock A001444 MPI2528 PERF FILM 50/50 54X25 YDS 3IN
0 0 MPI2528 Perforated Window 50/50 0
3366 A001444 MPI2528 PERF FILM 50/50 54X25 YDS 3IN
Reviews
There are no reviews yet.