Avery MPI2920 Matte Permanent

Description

Avery MPI2920 Matte Permanent
Avery Dennison
® MPI2920 / 2922 Matte Calendered
Permanent / Removable StaFlat
Revision: 7 Dated: 03/17/20
Uses:
Avery Dennison MPI2920 and 2922 Matte are tough,
scuff-resistant, flexible white promotional calendered
vinyl film. MPI2920 and 2922 Matte offers an
economical choice for applications requiring an
economy-calendered film with permanent or removable
adhesive performance.
Face: 3.4 mil (86 microns) matte
Adhesive: Permanent Acrylic
MPI 2920 – Permanent (clear)
MPI 2922 – Removable (gray)
Liner: 90# StaFlat
Application
Surfaces:
Flat, simple curves (restricted to
non-spill areas)
Features:
? Consistent printability
? Great image clarity and color pop
? Opaque
? Dimensionally stable liner for easy converting
? ICC profiles available on Avery Dennison’s website (https://avery-us.color-base.com)
Conversion:
? Solvent based inkjet
? Mild/Eco Solvent Inkjet
? Latex Inkjet
? UV Inkjet
Common Applications:
? Fleet (flat & simple curve only)
? Vehicle (flat & simple curve only)
? Wall Murals
? POP/ Trade Show
? Outdoor Signage
? Floor Graphics
? Ice Rink Boards / Dasher
Boards
Product Data Sheet
Page 1 of 4
Avery Dennison
® MPI2920 / 2922 Matte Calendered
Permanent / Removable StaFlat
Revision: 7 Dated: 03/17/20
Physical Characteristics:
Property Measurement Typical Value
Caliper, face
3.4 mil (97 µm)
Caliper, adhesive 1.0mil (25 µm)
Dimensional stability <0.025”(0.66 mm) Note: Ink loads in excess of 250% may cause increased shrinkage and/or increased initial adhesion of the printed film Tensile at Yield Elongation Gloss Hunter Gloss @ 60 degrees 55 Adhesion: 15 min (MPI2920 permanent) 15 min (MPI2922 removable) 5.5 lbs/in (962 N/m) 2.5 lbs/in (438 N/m) Removability MPI 2922 3 years from most substrates. Surface must be sealed. Flammability Self Extinguishing Shelf-Life 2 years from date of manufacture (when stored at the following temperatures and humidity conditions 68°-77° F (20° - 25° C) and 50±5% R. H.) Durability Vertical Exposure Unprinted: 5 years Printed: See ICS Performance Guarantee for printer specific information Min. Application Temperature 50° F (10° C) Service Temperature -40° to 180°F (-40° to 82° C) (Reasonable range of temperatures which would be expected under normal environmental conditions) Chemical resistance Resistant to most mild acids, alkalis, and salt solutions Product Data Sheet Page 2 of 4 Avery Dennison ® MPI2920 / 2922 Matte Calendered Permanent / Removable StaFlat Revision: 7 Dated: 03/17/20 Data represents average values where applicable, and is not intended for specification purposes. Warranty: This Warranty applies to the Product listed in this Data Sheet. All statements, technical information (including physical and chemical characteristics) and recommendations about Avery Dennison products are based upon tests believed to be reliable but do not constitute a guarantee or warranty. All Avery Dennison products are sold subject to the Purchaser’s assent and agreement that Purchaser is responsible for, and has independently determined, the suitability of such products for its purposes or its customer’s purposes. Avery Dennison products are warranted to be free from defects in material and workmanship (i) for two years from the date of manufacture, or (ii) from the date of manufacture until the expiration of the period stated on the specific Product Data Sheet in effect at the time of delivery.. Such time periods are subject in either case to the proper storing and application of said product, and the failure to properly store or apply the product, including without limitation the failure to follow any applicable Instructional Bulletin, negates any warranty. It is expressly agreed and understood that Avery Dennison's sole obligation and Purchaser's exclusive remedy under this warranty, under any other warranty, express or implied, or otherwise, shall be limited exclusively to: (a) repair or replacement of defective product without charge at Avery Dennison's plant or at the location of the product (at Avery Dennison's election), or (b) in the event repair or replacement are not commercially practical, a credit amount up to the price of the product taking into account the defect in the product in Avery Dennison’s sole discretion. THE WARRANTY EXPRESSLY SET FORTH ABOVE IS IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR ANY PARTICULAR USE AND/OR NON-INFRINGEMENT. SELLER SPECIFICALLY DISCLAIMS AND EXCLUDES ALL OTHER SUCH WARRANTIES. NO WAIVER, ALTERATION, ADDITION OR MODIFICATION OF THE FOREGOING CONDITIONS SHALL BE VALID UNLESS MADE IN WRITING AND MANUALLY SIGNED BY AN OFFICER OF AVERY DENNISON. AVERY DENNISON'S LIABILITY FOR DEFECTIVE PRODUCTS SHALL NOT EXCEED THE PURCHASE PRICE PAID THEREFORE BY PURCHASER AND IN NO EVENT SHALL AVERY DENNISON BE RESPONSIBLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES WHETHER FORESEEABLE OR NOT, CAUSED BY DEFECTS IN SUCH PRODUCT, WHETHER SUCH DAMAGE OCCURS OR IS DISCOVERED BEFORE OR AFTER REPLACEMENT OR CREDIT, AND WHETHER OR NOT SUCH DAMAGE IS CAUSED BY AVERY DENNISON'S NEGLIGENCE. All sales and contracts for sale of Products are subject to Purchaser’s assent and agreement to this Warranty. Avery Dennison hereby objects to any terms or conditions contained in any purchase order or other communication of any kind from the Purchaser that is conflicting, inconsistent or additional to this Agreement. Product Data Sheet Page 3 of 4 Avery Dennison ® MPI2920 / 2922 Matte Calendered Permanent / Removable StaFlat Revision: 7 Dated: 03/17/20 Related Documents: The following Avery Dennison literature will provide complete information to the user for proper application, storage, and other requirements and is available upon request from your Avery Dennison representative or from the Avery Dennison website (www.graphics.averydennison.com). Document Title Reference Number Substrate Cleaning and Preparation Instructional Bulletin #1.10 Storage, Maintenance, and Cleaning of PVC Films Instructional Bulletin #1.20 Warranty of Avery Dennison Films Instructional Bulletin #1.30 Removal Instructions Instructional Bulletin #4.10 Premask Recommendations Instructional Bulletin #5.50 Multi Purpose Inkjet OEM Qualification Matrix, Durability Reference, & Troubleshooting Guide Instructional Bulletin #5.80 Application and maintenance of the Avery floor marking System Instructional Bulletin #6.30 Wall Graphics Instructional Bulletin #6.50 Application to Glass: ? Because of the unique properties and varieties of glass, special considerations must be considered for windows and graphic applications. Avery Dennison accepts no liability for glass breakage. ? Glass absorbs heat when exposed to sunlight. The degree of absorption across windows can vary because of shading, heating, and cooling ventilation, and insulation from window frames. These temperature differences across the window produce stress, which can cause glass breakage. The ability of glass to resist breakage because of temperature stress is affected by window size, glass thickness, glass treatments, quality, and design. ? Window cleaning methods also vary, from the type of cleaners used, to the washing methods employed. Specific chemicals used in window cleaners may affect the adhesion of pressure-sensitive graphics. Power washing methods may impact the adhesion of graphics, if the water pressure or temperature exceeds the graphic’s adhesion capability. Power washing window graphics is not recommended. Revisions are italicized Avery Dennison ® is a registered trademark of Avery Dennison Corporation Easy Apply™ is a trademark of Avery Dennison Corporation Product Data Sheet Page 4 of 4 https://graphics.averydennison.com/content/dam/averydennison/graphics/na/en/documents/Product-Data-Sheets-NA-ONLY/DIM/Intermediate-Calendered/MPI-2900/pds-mpi-2920-2922-matte.pdf MPI2920 Matte Permanent A113384 MPI2920 MATTE PERM SF 54" A113334 MPI2920 MATTE PERM SF 60" A001098 MPI2920 MATTE PERM SF 54X50 YDS 3IN 0 0 MPI2920 Matte Permanent 0 0 A113384 MPI2920 MATTE PERM SF 54" 0 A113334 MPI2920 MATTE PERM SF 60" 3167 A001098 MPI2920 MATTE PERM SF 54X50 YDS 3IN