Avery MPI3302 Gloss Promotional Grey Removable

Description

Avery MPI3302 Gloss Promotional Grey Removable

Avery Dennison® MPI 3302 StaFlat™
Gloss White Promotional Vinyl Grey Removable
Features
•
•
•
•
•
•
•
•
Premium grade monomeric calendered film providing excellent printability
Two side PE StaFlat™ liner provides excellent handling across all major print
platforms
High gloss finish for superior appearance
Easy application to a wide variety of substrates
Good dimensional stability after application
Excellent value for money for short term promotional graphics
Easy and clean removability with heat for up to 1 year
Grey adhesive provides block out performance
Description
Film: 90 micron gloss white
monomeric calendered vinyl
Adhesive: Grey Removable
acrylic
Removability: up to 1 year
Backing: Two side PE coated
StaFlat™ 140g/m2
Outdoor life: Up to 3 years
(unprinted)
Application surface: Flat,
simple curves
Common Applications
•
•
•
•
•
•
•
•
Billboards
Transit advertising
Real estate signs
Point of purchase
Outdoor advertising
Indoor advertising
Exhibition
Windows
Uses
Avery Dennison MPI 3302 Staflat™ is a gloss white promotional vinyl film
designed for use in a wide range of short-term promotional and general
signage applications where block out performance, removability and value for
money is required.
Conversion+
Flat bed cutters Cold overlaminating
Friction fed cutters Electrostatic printing
Die cutting Latex inkjet
Thermal transfer Eco solvent inkjet
Screen printing Solvent inkjet
Offset printing UV curable inkjet
+Always test with your combination of printer and inks prior to commercial use.
Avery Dennison Graphics Solutions Asia Pacific
www.graphicsap.averydennison.com
General
Calliper, face film ISO 534 90 micron
Dimensional stability FTM 14 0.8 mm max
Opacity ASTM 2805 >100%
Gloss ISO2813 >30 GU(20 deg)
Adhesion, initial FINAT FTM-1, stainless steel 240 N/m
Adhesion, ultimate FINAT FTM-1, stainless steel 320 N/m
Removability ^^ Smooth OEM painted surfaces Up to 1 year
Flammability Self extinguishing
Shelf life Stored at 20-25° C / 50-55 % RH 1 year
Expected Durability ** Vertical exposure ^ Up to 3 years (unprinted)

^ See ICS Performance Guarantee Durability Bulletin for your
specific printer and ink combination for further information
^^ Not removable when applied to nitrocellulose paints, fresh
screen print inks, ABS, polystyrene & certain types of PVC
Thermal
Application temperature Minimum: +10oC
Service temperature range – 40oC to + 100oC
Chemical
Resistant to most petroleum based oils, greases and aliphatic solvents
Resistant to most mild acids, alkalies, and salts
Note:
Materials have to be properly dried and cured before further processing, like
laminating, varnishing, trimming, contour cutting or application. The residual
solvents can otherwise change the products’ specific features and properties.
Dimensional stability:
Is measured on a 150 x 150 mm aluminium panel to which
a specimen has been applied; 72 hours after application
the panel is exposed for 48 hours to + 70°C, after which
the shrinkage is measured.
Adhesion:
(FTM-1, FINAT) is measured by peeling a specimen at a
180° angle from a stainless steel or float glass panel, 24
hours after the specimen has been applied under
standardised conditions. Initial adhesion is measured 20
minutes after application of the specimen.
Flammability:
A specimen applied to aluminium is subjected to the flame
of a gas burner for 15 seconds. The film should stop
burning within 15 seconds after removal from the flame.
Temperature range:
A specimen applied to stainless steel is exposed at high
and low temperatures and brought back to room
temperature. 1 hour after exposure the specimen is
examined for any deterioration. Note: Prolonged
exposure to high and low temperatures in the presence of
chemicals such as solvents, acids, dyes, etc. may
eventually cause deterioration.
Chemical Resistance:
All chemical tests are conducted with test panels to which
a specimen has been applied. 72 hours after application
the panels are immersed in the test fluid for the given test
period. 1 hour after removing the panel from the fluid, the
specimen is examined for any deterioration.
Corrosion Resistance:
A specimen applied to aluminium is exposed to saline mist
(5% salt) at 35ºC. After exposure, the film is removed and
the panel is examined for traces of corrosion.
Test Methods
Avery Dennison® MPI 3302 Staflat™ Rev. 1 (March 2018)
Important
Information on physical characteristics is based
upon tests we believe to be reliable. The values
listed herein are typical values and are not for use
in specifications.
They are intended only as a source of information
and are given without guarantee and do not
constitute a warranty. Purchasers should
independently determine, prior to use, the
suitability of any material for their specific use.
All technical data is subject to change without
prior notice.
Warranty
Avery Dennison®
materials are manufactured
under careful quality control and are warranted to
be free from defect in material and workmanship.
Any material shown to our satisfaction to be
defective at the time of sale will be replaced
without charge. Our aggregate liability to the
purchaser shall in no circumstances exceed the
cost of the defective materials supplied. No
salesman, representative or agent is authorised to
give guarantee, warranty, or make any
representation contrary to the foregoing.
All Avery Dennison®
materials are sold subject to
the above conditions, being part of our
standard conditions of sale, a copy of which is
available on request.
**Expected Durability
The expected durability of Avery Dennison films
are defined as the expected performance life of
the Avery Dennison graphic film(s) within Zone 1
of the Avery Dennison zone system, in outdoor
vertical exposure conditions.
The actual performance life will depend on a
variety of factors, including selection and
preparation of substrate, angle and direction of
exposure, application methods, environmental
conditions and cleaning/maintenance of the films.
In case of films used in areas of high
temperatures or humidity, high altitudes and
industrially polluted areas the performance will be
further reduced.
Expected Durability and Warranted Period
Definitions
Expected durability is the expected period of time
defined in the product data sheet, the product
should, but is not warranted to, perform
satisfactorily when applied in vertical exposure
conditions as defined in Instructional Bulletin 1.30.
The warranted period as defined in the
appropriate ICS Performance Guarantee Bulletin,
is the maximum period of time Avery Dennison
will warrant the finished products performance in
accordance with ICS Performance Guarantee
Terms and Conditions 1.0, provided that the film
is properly stored, converted and installed in
accordance with Avery Dennison guidelines.
+Compatible with most printer and ink
combinations. Test prior to use.
A113790 MPI3302 GLOSS GREM CCK 54″
A113792 MPI3302 GLOSS GREM CCK 60″
A003933 MPI3302 GLOSS GREM CCK 60X50 YDS 3IN
A003934 MPI3302 GLOSS GREM CCK 60X100 YDS 3IN
A003935 MPI3302 GLOSS GREM CCK 60X250 YDS 3IN
A003931 MPI3302 GLOSS GREM CCK 54X50 YDS 3IN
A003932 MPI3302 GLOSS GREM CCK 54X100 YDS 3IN
A003929 MPI3302 GLOSS GREM CCK 30X50 YDS 3IN
A010505 MPI3302 GLOSS GREM CCK 54X5

320237A54R A113790 MPI3302 GLOSS GREM CCK 54″
0 A113792 MPI3302 GLOSS GREM CCK 60″
5244 A003933 MPI3302 GLOSS GREM CCK 60X50 YDS 3IN
5245 A003934 MPI3302 GLOSS GREM CCK 60X100 YDS 3IN
0 A003935 MPI3302 GLOSS GREM CCK 60X250 YDS 3IN
5242 A003931 MPI3302 GLOSS GREM CCK 54X50 YDS 3IN
5243 A003932 MPI3302 GLOSS GREM CCK 54X100 YDS 3IN
5240 A003929 MPI3302 GLOSS GREM CCK 30X50 YDS 3IN
0 A010505 MPI3302 GLOSS GREM CCK 54X5