Description
Avery HV1100-688-R PERM SF-A BLUE
Avery Dennison® HV1100 High Visibility Series
Permanent Staflat
(formerly: A3, NV200 series StaFlat )
Revision: 4 Dated: 01/06/16
Product Data Sheet
Page 1 of 3
[email protected]
Customer Service: 800-282-8379
Uses:
Avery Dennison® HV 1100 Reflective
intermediate utility grade products are value
priced enclosed lens retro-reflective films
which provide improved day/night visibility
for applications which do not have specified
reflectivity minimums. Avery Dennison HV
1100 Reflective films have been primarily
designed for use in non-engineer grade
computer cut signage and markings where
day/night visibility is required.
Face: 4.5 mil (113 microns) high
gloss urethane
Adhesive: Permanent Clear
Acrylic
Liner: 90# StaFlat
Durability: Up to 3 years
Application
Surfaces:
Flat
Features:
Dimensionally stable liner for easy converting
High gloss finish
Excellent conversion on CAD plotters
Easy cutting & weeding
Good dimensional stability
Good UV, temperature, humidity, and salt-spray resistance
Economical retro-reflective
Day & Night visibility
Conversion:
Flat Bed Sign-Cut
Drum Roller Sign-Cut
Steel Rule Die-Cutting
Screen Printing
Common Applications:
Trucks
Trailers
Cars & Vans
Architectural Signage
Directional Signage
Trains & light rail
Buses
Outdoor advertising
Avery Dennison® HV1100 High Visibility Series
Permanent Staflat
(formerly: A3, NV200 series StaFlat )
Revision: 4 Dated: 01/06/16
Product Data Sheet
Page 2 of 3
[email protected]
Customer Service: 800-282-8379
Physical Characteristics:
Property Typical Values
Caliper, face 4.5 mil (113 microns)
Caliper, adhesive 1.0mil (25 µm)
Dimensional
stability
Less than 0.03 in. (0.76 mm)
shrinkage. (1000 hours Atlas
Twin Arc Weatherometer,
EH)
Tensile at Yield 4.0 -8.0 lb/in (0.7 1.5 kg/cm)
Elongation 70% min.
Gloss 90% ± 10
Adhesion: 15 min. 3.5 lbs/in (612 N/m)
24 hr. 4.5 lbs/in (787 N/m)
Flammability Self Extinguishing
Shelf-Life 2 years from date of
manufacture
when stored at the following
temperatures and humidity
conditions 68°-77° F (20° – 25° C)
and 50±5% R. H.
Durability Vertical
Exposure
Up to 3 years
(Some color fade may occur in severe
environmental areas. Reference IB #1.30
for durability guidelines.)
Min. Application
Temperature
40° F (4°C)
Service
Temperature
-40° to 180°F (-40° to 82° C)
(Reasonable range of temperatures which
would be expected under normal
environmental conditions).
Chemical
resistance
Resistant to most mild acids,
alkalis, and salt solutions.
Data represents average values where applicable, and is not
intended for specification purposes.
Warranty:
This Warranty applies to the Product listed in this Data
Sheet. All statements, technical information (including
physical and chemical characteristics) and recommendations
about Avery Dennison products are based upon tests
believed to be reliable but do not constitute a guarantee or
warranty. All Avery Dennison products are sold subject to the
Purchasers assent and agreement that Purchaser is
responsible for, and has independently determined, the
suitability of such products for its purposes or its customers
purposes. Avery Dennison graphics products are warranted
to be free from defects in material and workmanship for two
years from the date of manufacture. When the product is
properly applied, the warranty period is as stated in the
product’s specific Product Data Sheet in effect at the time of
shipment to Avery Dennison’s customer.
Such time periods are subject in either case to the proper
storing and application of said product, and the failure to
properly store or apply the product, including without
limitation the failure to follow any applicable Instructional
Bulletin, negates any warranty. It is expressly agreed and
understood that Avery Dennison’s sole obligation and
Purchaser’s exclusive remedy under this warranty, under
any other warranty, express or implied, or otherwise, shall be
limited exclusively to: (a) repair or replacement of defective
product without charge at Avery Dennison’s plant or at the
location of the product (at Avery Dennison’s election), or (b)
in the event repair or replacement are not commercially
practical, a credit amount up to the price of the product
taking into account the defect in the product in Avery
Dennisons sole discretion.
THE WARRANTY EXPRESSLY SET FORTH ABOVE IS IN
LIEU OF ANY OTHER WARRANTIES, EXPRESS OR
IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY
IMPLIED WARRANTIES OF MERCHANTABILITY,
FITNESS FOR ANY PARTICULAR USE AND/OR NONINFRINGEMENT. SELLER SPECIFICALLY DISCLAIMS
AND EXCLUDES ALL OTHER SUCH WARRANTIES. NO
WAIVER, ALTERATION, ADDITION OR MODIFICATION
OF THE FOREGOING CONDITIONS SHALL BE VALID
UNLESS MADE IN WRITING AND MANUALLY SIGNED BY
AN OFFICER OF AVERY DENNISON.
AVERY DENNISON’S LIABILITY FOR DEFECTIVE
PRODUCTS SHALL NOT EXCEED THE PURCHASE
PRICE PAID THEREFORE BY PURCHASER AND IN NO
EVENT SHALL AVERY DENNISON BE RESPONSIBLE
FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
WHETHER FORESEEABLE OR NOT, CAUSED BY
DEFECTS IN SUCH PRODUCT, WHETHER SUCH
DAMAGE OCCURS OR IS DISCOVERED BEFORE OR
AFTER REPLACEMENT OR CREDIT, AND WHETHER OR
NOT SUCH DAMAGE IS CAUSED BY AVERY
DENNISON’S NEGLIGENCE.
All sales and contracts for sale of Products are subject to
Purchasers assent and agreement to this Warranty. Avery
Dennison hereby objects to any terms or conditions
contained in any purchase order or other communication of
any kind from the Purchaser that is conflicting, inconsistent
or additional to this Agreement
Avery Dennison® HV1100 High Visibility Series
Permanent Staflat
(formerly: A3, NV200 series StaFlat )
Revision: 4 Dated: 01/06/16
Product Data Sheet
Page 3 of 3
[email protected]
Customer Service: 800-282-8379
Limitation of End Uses:
Certain applications are not recommended or warranted by Avery Dennison. Unsuitable applications
include:
Stainless Steel
Wood (painted or unpainted)
Urethane substrates
Walls
Compound curves
Corrugations
Flexible substrates
Low surface energy substrates (i.e. Tedlar coatings)
Unclean or textured surfaces
Wet method of application not recommended on HV Reflective Series reflective films. Use of wet
method of application invalidates standard warranty on this product
Long term exposure to temperatures over 140°F
Non-Vertical applications (durability is for vertical exposure ONLY, defined as ±10° from vertical)
Colors Cross Reference:
HV1100 Series Name Item #s
Vertical
Durability
Zone 1 Years HV1100 Series Name Item #s
Vertical
Durability
Zone 1 Years
HV1100-101-R White Perm SF 3801R 3 HV1100-688-R Blue Perm SF 3822R 3
HV1100-440-R Red Perm SF 3816R 3
Discontinued Colors as of 01/01/16:
HV1100 Series Name Item #s
Vertical
Durability
Zone 1 Years HV1100 Series Name Item #s
Vertical
Durability
Zone 1 Years
HV1100-235-R Yellow Perm SF 3812R HV1100-450-R Dark Red Perm SF 3818R 3
HV1100-360-R Orange Perm SF 3815R HV1100-778-R Green Perm SF 3824R 3
Minimum Coefficient of Retro-Reflectivity:
Color Coefficient of
Retro-Reflectivity Color Coefficient of
Retro-Reflectivity
White 50 Dark Red 10
Yellow 25 Blue 4
Orange 13 Green 5
Red 14
(Tested per ASTM E810 at 4o
EA/0.2o
OA)
Revisions are italicized
Avery Dennison is a registered trademark of Avery Dennison Corporation
https://graphics.averydennison.com/content/dam/averydennison/graphics/na/en/documents/Product-Data-Sheets-NA-ONLY/SandC/reflective/reflective-tapes-hv/pds-hv-1100-permanent-staflat.pdf
High Visibility (HV) 1200 Reflective – Easy Apply RS
High Visibility (HV) 1200 Reflective
High Visibility (HV) 1100 Reflective
3822RA A001623 HV1100-688-R PERM SF-A BLUE 15″ x 10 yd Pun
3822RC A001624 HV1100-688-R PERM SF-C BLUE 15″ x 50 yd Pun
3822RE A001625 HV1100-688-R PERM SF-E BLUE 30″ x 10 yd Pun
3822RF A001626 HV1100-688-R PERM SF-F BLUE 15″ x 50 yd
3822RG A001627 HV1100-688-R PERM SF-G BLUE 30″ x 50 yd Pun
3822RK A001628 HV1100-688-R PERM SF-K BLUE 24″ x 10 yd
3822RM A001629 HV1100-688-R PERM SF-M BLUE 24″ x 50 yd
3822RQ A001630 HV1100-688-R PERM SF-Q BLUE 30″ x 50 yd
3822RR A001631 HV1100-688-R PERM SF-R BLUE 48″ x 10 yd
3822RS A001632 HV1100-688-R PERM SF-S BLUE 48″ x 100 yd
3822RT A001633 HV1100-688-R PERM SF-T BLUE 48″ x 250 yd
3822RU A001634 HV1100-688-R PERM SF-U BLUE 48″ x 50 yd
Reviews
There are no reviews yet.