Avery T-1500-250-R PERM SF YELLOW

Description

Avery T-1500-250-R PERM SF YELLOW 48X50
Avery Dennison®
T-1000 & W-1000 Series
Engineering Grade Beaded Retroreflective Film
Issued: July 2013
Product Data Sheet
Page 1 of 7
Reflective Solutions
7542 North Natchez Ave. www.reflectives.averydennison.com
Niles, IL 60714
Avery Dennison? T-1000 & W-1000 Series
Beaded Engineering Grade Retroreflective
Film for permanent and temporary traffic
signage, is a high-quality, durable, enclosed
lens retroreflective material with a pressure
sensitive adhesive.
T-1000 & W-1000 Series sheeting is an
Omni-Directional beaded film. This feature
benefits agencies by providing confidence
that all signs will perform with uniform visual
reflectivity at all sign face orientations.

Features:
? Omni-Directional
? Field proven long term durability on safety devices worldwide
? Pattern free face allows for clean graphic imaging
? Economical choice for non-critical signs
? Uniform daytime and nighttime visual appearance
Conversion: Product Availability*:
Screen Printing Traffic Products
Thermal Transfer Printing T-1100 White
Solvent Based Inkjet Printing T-1101 Yellow
Mild/Eco Solvent Inkjet Printing T-1500 White
UV Inkjet Printing T-1500-D White (Matan)
Thermal Die-Cut T-1501 Yellow
Flat Bed Sign-Cut T-1501-D Yellow (Matan)
Drum Roller Sign-Cut T-1505 Blue
Steel Rule Sign-Cut T-1507 Green
T-1508 Red
T-1509 Brown
Work Zone Products**
W-1104
Orange W-1204
W-1504
Applications: W-1142 Orange
Pre-Striped
Barricade
4” Left
Rigid Permanent and Temporary Outdoor Signage W-1143 4” Right
Rigid Work Zone Devices W-1144 6” Left
Nonessential Signage where Retrorelection is Necessary W-1145 6” Right
*See Page 5 for Nomenclature.
**3 Year Durability
Performance:
ASTM D4956 Type I,
EN-12899 RA1
See Page 2 for complete list.
Orientation: Omni-Directional
Durability: 7 years
Vertical Exposure Only
Face: High-Gloss Urethane
with Glass Microspheres
(D-version: High Gloss PVC)
Adhesive: Permanent
Pressure Sensitive
Liner: White Polyethelene
Coated Paper StaFlat®
Avery Dennison®
T-1000 & W-1000 Series
Engineering Grade Beaded Retroreflective Film
Issued: July 2013
Product Data Sheet
Page 2 of 7
Reflective Solutions
7542 North Natchez Ave. www.reflectives.averydennison.com
Niles, IL 60714
Retroreflectivity:
Table A:
Min. coefficients of retroreflection (RA)
1
per ASTM D49562
Type I
Observation
Angle Color
Entrance Angle
– 4° + 30°
0.2°
White 70 30
Yellow 50 22
Orange 25 7
Blue 4 1.7
Green 9 3.5
Red 14 6
Brown 1.0 0.3
0.5°
White 30 15
Yellow 25 13
Orange 13 4
Blue 2.0 0.8
Green 4.5 2.2
Red 7.5 3.0
Brown 0.3 0.2
Table B:
Min. coefficients of retroreflection (RA)
1 EN 12988 Table 3
?
Observation
Angle
Color
?1 (?2=0?) Entrance Angle
+ 5° + 30° + 40°
12’
(0.2°)
White 70 30 10
Yellow 50 22 7
Orange 25 10 2.2
Blue 4 1.7 0.5
Green 9 3.5 1.5
Red 14.5 6 2
Brown 1 0.3 —
20’
(0.33°)
White 50 24 9
Yellow 35 16 6
Orange 20 8 2.2
Blue 2 1 —
Green 7 3 1.2
Red 10 4 1.8
Brown 0.6 0.2 —
2°
White 5 2.5 1.5
Yellow 3 1.5 1.0
Orange 1.2 0.5 —
Blue — — —
Green 0.5 0.3 0.2
Red 1 0.5 0.5
Brown — — —
T-1000 & W-1000 Series
exceeds all values listed in Table
A and Table B.
T-1000 & W-1000 Series also
exceeds the current applicable
requirements for the following
specifications:
ASTM D4956 International
EN-12899 EU
GB/T 18833 China
N-CMT-5-03-001 Mexico
UNE 135334 Spain
NF XP98520 France
BSI 8408 UK
UNI 11122 Italy
JIS Z9117 Japan
SANS 1519-1 South Africa
AS/NZS 1906.1
Australia
New
Zealand
ABNT NBR 14644 Brazil
IRAM 10 033 Argentina
Avery Dennison suggests you
obtain the current requirements
from your local agency and
ensure product conformance with
such requirements. Your Avery
Dennison Representative can
assist you in this regard.

1RA =
candelas per foot-candle per
square foot (cd/fc/ft2
) OR
Candelas per lux per square meter
(cd/lx/m2
)
2 Measured according to ASTM E810
Avery Dennison®
T-1000 & W-1000 Series
Engineering Grade Beaded Retroreflective Film
Issued: July 2013
Product Data Sheet
Page 3 of 7
Reflective Solutions
7542 North Natchez Ave. www.reflectives.averydennison.com
Niles, IL 60714
Colors and Specification Limits:
Figure A: Daytime Color – CIE Color Diagram
Figure B: Nighttime Color
T-1000 & W-1000 Series meets
the current applicable daytime
and nighttime color requirements
for ASTM D4956 and EN-12899
as well as standards listed on
Page 2.
Chromaticity Coordinate Limits
Figures A & B show the four
pairs of chromaticity coordinates
from ASTM D4956 and EN12899 on the color grid.
Daytime Color
The four pairs of chromaticity
coordinates in Figure A
determine the acceptable color in
terms of the CIE 1931 Standard
Colorimetric System measured
with Standard Illuminant D65 and
CIE Publication no. 15 using CIE
Standard Illuminant D65 and CIE
45/0 geometry. Luminance factor
shall comply with table in
Figure A.
Note: The saturation limit of
green and blue may extend to the
border of the CIE chromaticity
locus for spectral colors
Nighttime Color
The four pairs of chromaticity
coordinates in Figure B
determine the acceptable color
measured using CIE Illuminant A,
obvservation angle of 0.33
degrees, entrance angle of +5
degrees, source and receiver
apertures not to exceed 10
minutes of arc, and CIE 1930 (2
degree) standard observer per
ASTM D4956.
Avery Dennison®
T-1000 & W-1000 Series
Engineering Grade Beaded Retroreflective Film
Issued: July 2013
Product Data Sheet
Page 4 of 7
Reflective Solutions
7542 North Natchez Ave. www.reflectives.averydennison.com
Niles, IL 60714
Sheeting Orientation:
The American Association of State Highway Transportation
Officials (AASHTO) has recognized that some retroreflective
films are rotationally (orientation) sensitive. Because this impacts
sign luminance, AASHTO has defined a specification to measure
orientation performance. Figure C shows how the orientation
sensitivity is measured. In order for a film to be considered
rotationally insensitive, the average percent difference (shown in
Figure C) must be less than or equal to 20%.
Figure C
When measured for orientation sensitivity as described in
AASHTO M 268-10, all Avery Dennison sheeting, both beaded
and prismatic, pass the specification as rotationally insensitive.
Therefore, no special identification marks or other features (such
as a datum mark, or distinctive seal pattern) are required to
denote optimum orientation for sheeting. Because the user can
expect visual uniformity regardless of orientation, no costly and
cumbersome fabrication techniques are required to orient sheets,
cut sign legend or border tape during sign fabrication.
Specifying agencies and sign fabricators are cautioned that some
retroreflective sheetings, even of the same ASTM “Type” may not
provide consistent luminance for desired night visibility if the
sheeting is not applied in the optimal, or in uniform orientation.
Agencies and fabricators should be aware of this concern and
discuss the potential effects of rotation on luminance of specific
sheetings with their material supplier before beginning installation
and/or fabrication.
T-1000 & W-1000 Series is
Omni-Directional and passes the
AASHTO specification as being
rotationally insensitive.
Retroreflectivity RA values taken
per ASTM E810
0.5? Observation angle and
-4? or 5? Entrance angle
As a datum for laboratory
measurements R0 is identified in
the crossweb direction.
Watermark: T-1000 & W-1000
Series does not have a
watermark.
Avery Dennison®
T-1000 & W-1000 Series
Engineering Grade Beaded Retroreflective Film
Issued: July 2013
Product Data Sheet
Page 5 of 7
Reflective Solutions
7542 North Natchez Ave. www.reflectives.averydennison.com
Niles, IL 60714
Nomenclature:
Initial Letter Application Durability*
T Traffic/Permanent Sheeting 7 year
W Work Zone Sheeting 3 year
WR Work Zone Reboundable 3 year
* See your local representative for complete details.
Series 1000
2
nd Number Substrate
1 Pressure Sensitive for Plastic Substrates
2 Pressure Sensitive for Wood Substrates
5 Pressure Sensitive for Aluminum Substrates
3
rd & 4th Numbers Color
00 White
01 Yellow
04 Orange
05 Blue
07 Green
08 Red
09 Brown
11 Fluorescent Yellow
13 Fluorescent Yellow-Green
14 Fluorescent Orange
42 4” LEFT Orange Pre-Striped Barricade
43 4” RIGHT Orange Pre-Striped Barricade
44 6” LEFT Orange Pre-Striped Barricade
45 6” RIGHT Orange Pre-Striped Barricade
†
OmniCube is the exception and leads with the number 11
The following Warranty is limited to North America.
WARRANTY
Avery Dennison T-1000 & W-1000 beaded
retroreflective sheeting (“Product(s)”) are warranted to
be free from defects in material and workmanship for
one (1) year from date of purchase (or the period
stated on the specific product information literature in
effect at time of delivery, if longer). It is expressly
agreed and understood that Avery Dennison’s sole
obligation and Purchaser’s exclusive remedy under this
warranty, under any other warranty, express or implied,
or otherwise, shall be limited to repair or replacement
of defective Product without charge at Avery
Dennison’s plant or at the location of Product (at Avery
Dennison’s election), or in the event replacement or
repairs is not commercially practical, to Avery
Dennison’s issuing Purchaser a credit reasonable in
light of the defect in the Product.
Avery Dennison further warrants that Avery Dennison?
T-1000 & W-1000 Beaded reflective sheeting will retain
its effectiveness as a component of traffic control and
guidance signs, and will meet the stated minimum
values for coefficient of retroreflection (“Performance
Warranty”) as set forth in accordance with the following
standards:
Warranty Period* Minimum Percentage
RA Retained
1-7 years 50%
*Performance Warranty Period for Work Zone products
is one to three (1-3) years
Note: For transparent color screen printed areas using
Avery Dennison supplied or approved inks or OL-2000
Overlay films on Avery Dennison? T-1500 white
sheeting, values shall be a minimum of 70% of values
in Table A
RA percentage retained above apply to all entrance and
observation angles in Table A, and shall be measured
per ASTM E 810.
All measurements shall be made after cleaning
according to Avery Dennison procedures.
PERFORMANCE WARRANTY
If within seven (7) years of installation such
deterioration occurs or the Product fails to retain the
minimum seven (7)-year reflectivity values, Avery
Dennison will restore the installation surface to its
original effectiveness at no cost for materials or labor.
CONDITIONS.
This warranty shall be effective only if all of the
following conditions are met:
Fabrication and/or installation must occur within one (1)
year from the date of purchase.
The failure must have resulted solely from a
manufacturing defect or deterioration of the Product
due to natural causes under the Performance
Warranty. Without limiting the generality of the
foregoing, there is no warranty for the failure of the
sheeting due to improper sign fabrication, storage,
handling, installation, maintenance, failure of the sign
substrate, vandalism or mischief. Slight color fading,
cracking, chalking, edge lifting, or slight reduction in
gloss or reflectivity will not materially detract from
appearance and does not constitute a breach of
warranty.
Avery Dennison has published instructional bulletins
pertaining to the storage, handling, and cleaning of
Product, approved substrates, and application
procedures (collectively, the “Procedures”). The
Product must have been processed and applied to
blank, clean material in accordance with the
Procedures, as such may be amended from time to
time. Avery Dennison reserves the right to reject any
warranty claim where the fabricator or installer cannot
satisfactorily prove or demonstrate that the Avery
Dennison procedures were utilized. The date of
installation, warranty registration, and claim procedures
established by Avery Dennison must be followed, and
failure to follow such procedures shall void this
warranty. Replacement Product carries only the
unexpired warranty portion of the Product it replaces.
The Product must be properly stored and applied within
the shelf-life as stated in the applicable Avery
Dennison Product Data Sheet including adhesive and
other material product data sheets.
T – 1 5 0 0
Initial Letter(s): Application/Durability
1
st & 2nd
Number(s): Series
3
rd & 4th Numbers: Color
2
nd
Number: Adhesive
Initial Letter(s): Application/Durability
1
st Number†
: Series
Avery Dennison®
T-1000 & W-1000 Series
Engineering Grade Beaded Retroreflective Film
Issued: July 2013
Product Data Sheet
Page 6 of 7
Reflective Solutions
7542 North Natchez Ave. www.reflectives.averydennison.com
Niles, IL 60714
Characteristics:
Property Value Instructional
Bulletins
Shelf-Life
1 year from date of purchase
when stored at the following
conditions;
65°-75°F (18°-24°C) and 50% ?
5% R.H.
#8.00
Typical film
Caliper
4.5 – 5.5 mils
(114 – 140µ)
W-1100 Series:
5.5 – 6.5 mils
(139 – 165µ)
NA
Min. Application
Temperature
65° F
(18° C) #8.10
Service
Temperature
-10°F to +150°F
(-23°C to + 65°C) #8.00
Screen Printing
Long term durability of screen
printing in combination with T1000 & W-1000 is warranted
when used with approved inks
and overlays. See Page 7.
#8.30
#8.55
Inkjet Printing
User assumes responsibility for
fitness of use for this converting
method. Long term durability of
inkjet printing in combination
with T-1000 & W-1000 series is
not warranted.
#8.55
Thermal Transfer
Printing
Long term durability of thermal
transfer printing in combination
with T-1500D is warranted.
Refer to Instructional Bulletin.
#8.60
ADDITIONAL LIMITATIONS
Unintended Use: This warranty only applies to
Product that is used by professional converters and
installers for the defined end uses and in the
combinations described in the applicable Avery
Dennison Product Data Sheets and Instructional
Bulletins. For any other use, the user is responsible for
determining the suitability of the Product, and for any
and all risk or liability associated with that use or
application, and the user agrees to indemnify, defend
and hold harmless Avery Dennison for any claims,
losses, damages, judgments, expenses and/or
expenses, including attorneys fees, resulting from such
use or application. This warranty is expressly
conditioned on the Product being processed by
professional converters or installers in accordance with
the Avery Dennison recommended written processing
instructions, and being applied to properly prepared
surfaces and cleaned and maintained in accordance
with recommended Avery Dennison procedures. It is
the converters, installers or other users responsibility to
perform incoming raw material quality inspections, to
assure proper surface preparation and that approved
application procedures are followed, to retain
converted samples, and to immediately cease using
and notify Avery Dennison and/or its authorized agent
or distributor of any Product, Materials and/or finished
Product discovered to be (or reasonably capable of
being discovered to be) defective.
Misuse and Force Majeure: Avery Dennison has no
obligations or liability under this warranty with respect
to Product that has been altered, modified, damaged,
misused, abused, subject to accident, neglected or
otherwise mishandled or improperly processed or
installed. Product is not warranted against premature
failure caused by chemical, environmental or
mechanical means such as, but not limited to,
vandalism, cleaning solutions, paints, solvents,
moisture, temperature, mechanical washing
equipment, engine fuel spills, engine exhaust, steam,
organic solvents or other spilled chemicals pollutants,
including industrial and volcanic ash. Damage from fire,
structural failure, lightning, accidents, and other force
majeure events are not covered by this warranty.
Third Party Product: Avery Dennison assumes no
responsibility for any injury, loss or damage arising out
of the use of a product that is not of our manufacture.
Where installer or converter uses or reference is made
to a commercially available product, made by another
manufacturer, it shall be the responsibility of the user,
installer or converter to ascertain the precautionary
measures for its use outlined by the manufacturer.
The remedies provided under this warranty are
exclusive. In no event shall Avery Dennison be
responsible for any direct, indirect, incidental or
consequential damages or specific relief whether
foreseeable or not, caused by defects in such Product,
whether such damage occurs or is discovered before
or after replacement or credit, and whether or not such
damage is caused by Avery Dennison’s negligence. In
no event shall Avery Dennison’s liability hereunder
exceed the remedies specifically set forth in this
warranty. Avery Dennison’s liability shall be limited, at
Avery Dennison’s option, to the purchase price,
replacement of the defective Product and in some
cases when authorized by Avery Dennison the repair
and replacement of the defective Product.
THIS WARRANTY IS GIVEN IN LIEU OF ALL
OTHERS. ANY AND ALL OTHER WARRANTIES,
WHETHER EXPRESS OR IMPLIED, INCLUDING
IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE,
ARE HEREBY DISCLAIMED. NO WAIVER,
ALTERATION, ADDITION OR MODIFICATION OF
THE FOREGOING CONDITIONS SHALL BE VALID
UNLESS MADE IN WRITING AND MANUALLY
SIGNED BY AN OFFICER OF AVERY DENNISON.
Avery Dennison®
T-1000 & W-1000 Series
Engineering Grade Beaded Retroreflective Film
Issued: July 2013
Product Data Sheet
Page 7 of 7
Reflective Solutions
7542 North Natchez Ave. www.reflectives.averydennison.com
Niles, IL 60714
Converting Information:
The following Avery Dennison literature will provide information to
the user for proper application, storage, and other requirements.
Find the latest information on the Avery Dennison website,
www.reflectives.averydennison.com. We encourage you to
check our website periodically for updates.
Approved screen printing inks, overlays, thermal transfer ribbons:
Supplier Series System
Instructional
Bulletins
Avery Dennison 7TS 1 Part Solvent #8.37
Avery Dennison OL-2000 Acrylic Overlay #8.01, #8.10, #8.25
Avery Dennison OL-1000 Anti-Graffiti #8.01, #8.10
Matan DTS Thermal Transfer #8.60
Instructional Bulletins:
Film Care & Handling #8.00
Substrate Requirements #8.01
Application Techniques for PS Film #8.10
Cutting Methods #8.20
Computer Sign Cutting #8.25
Screen Preparation #8.30
Troubleshooting Printing & Processing #8.34
7TS Series Ink #8.37
Ink Recommendations Guide #8.55
Matan Thermal Transfer Printing #8.60
Substrates:
The application of Avery Dennison T-1000 & W-1000 Series
sheeting is limited to properly prepared substrates which differ by
product. For traffic products and W-1504, application is limited to
properly prepared Aluminum. For products in the W-1100 line,
application is limited to properly prepared plastic. For products in
the W-1200 line, application is limited to properly prepared wood.
Users are urged to carefully evaluate, under actual use
conditions, any film application to other substrates. Failure of film
caused by other substrates, materials, contamination, or
improper surface preparation is not the responsibility of Avery
Dennison. See Instruction Bulletin #8.01 for full details on
substrate requirements.
DEFINITIONS
Durability: means that the Product in a finished
graphic, panel or sign situated outdoors, subject to the
limitations herein and Avery Dennison Product Data
Sheets and Instructional Bulletins, and applied to
recommended surfaces, will not deteriorate
excessively such that the finished sign, panel or
graphic is ineffective for its identification when viewed
under normal conditions from the intended viewing
distance.
Outdoor Durability: is based on normal middle
European and central North American outdoor
exposure conditions and application to recommended
surfaces. Actual performance life will depend on a
variety of factors, including but not limited to substrate
preparation, exposure conditions and maintenance of
the Product and finished graphic, panel or sign. In case
the finished graphics, panel or sign is in areas of high
temperatures or humidity, in industrially polluted areas
or other areas with air laden particulate matter, and/or
in high altitudes, Outdoor Durability may be reduced.
Please see your local Avery Dennison representative
for changes to warranties based on such localized
conditions.
Vertical Exposure: means that the face of the finished
graphic is ±10° from vertical.
Non-Vertical Exposure: means that the face of the
finished graphic is greater than 10° from vertical and
greater than 5° from horizontal. Retroreflective films
are not warranted for this exposure.
Flat surfaces: means a two dimensional flat surface
without protruding objects.
Weathering Effects: Some degradation of Product
performance over time is considered normal wear.
Slight color fading, chalking, edge lifting, or slight
reduction in gloss or reflectivity due to normal wear
exposure and other natural weathering, environmental
or other conditions or damage caused by tornadoes,
hurricanes, wind, excessive ice buildup or
extraordinary frozen particulate conditions, large hail
stones or other acts of God, do not constitute a breach
of warranty or give rise to any liability by Avery
Dennison.
Printing, Curing and Ink Defects: Ink contaminations,
failures or other defects, or other failures due to
improper printing conditions or settings including, but
not limited to, unsuitable color calibration, incorrect ICC
color profile or incompatible printing, do not constitute
a breach of warranty. Product failure caused by ink
over-saturation, excessive or under curing, failure of
ink to render desired colors on Product, or other
treatment or processing errors are not warranted.
Adhesion to Application Surfaces: This warranty
does not cover the Product if the application surface is
not properly prepared; nor does the warranty cover the
Product or damage to the substrate because the layers
of the substrate separate due to a lower bond between
those layers than the bond between the Product and
the top layer of the substrate, or surfaces which
subsequently crack, peel, outgas, or become damaged
beneath the Product
INDEPENDENT TESTING REQUIRED
All statements, technical information and
recommendations about Avery Dennison products are
based upon tests and information believed to be
reliable but do not constitute a guarantee or warranty
of any kind. All Avery Dennison products are sold with
the understanding that Purchaser has independently
determined the suitability of such products for its
intended and other purposes.
Avery Dennison and the logo are registered
trademarks or tradenames of Avery Dennison Corp. ©
2011 All Rights Reserved.
https://www.averydennison.com/content/dam/averydennison/reflectives/na/na/Product-Data-Sheets/PDB-T-1000-NA-07-26-2013.pdf
6611 A020212 T-1500-250-R PERM SF YELLOW 48X50 48″ x 50 yd
6612 A020213 T-1500-250-R PERM SF YELLOW 24X50 24″ x 50 yd