Avery Dennison MVP Maximum Visual Performance T-7511 Series Fluorescent Yellow

Description

Avery Dennison MVP Maximum Visual Performance T-7511 Series Fluorescent Yellow

Avery Dennison T-7000 & W-7000
Maximum Visual Performance (MVP) Series
Microprismatic Retroreflective Film is a
premium product providing high levels of
performance for demanding long distance
conspicuity. It is a high-quality, durable,
microprismatic retroreflective material with a
pressure sensitive adhesive.
T-7000 & W-7000 MVP Series sheeting is
an Omni-Directional microprismatic film that
incorporates tiles of microprisms arranged in
multiple orientations. This feature – “Smart
at Every Angle” benefits agencies by
providing confidence that all signs will
perform with uniform visual reflectivity at all
sign face orientations.

Features:
 Omni-Directional
 Microprismatic Retroreflective Performance
 Field proven long term durability on safety devices worldwide
 Uniform daytime and nighttime visual appearance
Conversion: Product Availability*:
Screen Printing
Thermal Transfer Printing
Eco Solvent Inkjet Printing
Thermal Die-Cut
Flat Bed Sign-Cut
Drum Roller Sign-Cut
Steel Rule Sign-Cut
Traffic Products
T-7500 White
T-7501 Yellow
T-7505 Blue
T-7507 Green
T-7508 Red
T-7509 Brown
T-7511 Fluorescent Yellow
T-7513 Fluorescent YellowGreen
T-7113 Fluorescent YellowGreen
Work Zone Products**
Applications: W-7200 White
Rigid Permanent and Temporary Outdoor Signage W-7114
Fluorescent Orange Rigid Work Zone Devices W-7214
Safety Devices that require Long Distance Retroreflective Performance W-7514
*See Page 5 for Nomenclature
**3 Year Durability

The American Association of State Highway Transportation
Officials (AASHTO) has recognized that some retroreflective
films are rotationally (orientation) sensitive. Because this impacts
sign luminance, AASHTO has defined a specification to measure
orientation performance. Figure C shows how the orientation
sensitivity is measured. In order for a film to be considered
rotationally insensitive, the average percent difference (shown in
Figure C) must be less than or equal to 20%

CONDITIONS
When measured for orientation sensitivity as described in
AASHTO M 268-10, all Avery Dennison sheeting, both beaded
and prismatic, pass the specification as rotationally insensitive.
Therefore, no special identification marks or other features (such
as a datum mark, or distinctive seal pattern) are required to
denote optimum orientation for sheeting. Because the user can
expect visual uniformity regardless of orientation, no costly and
cumbersome fabrication techniques are required to orient sheets,
cut sign legend or border tape during sign fabrication.
Specifying agencies and sign fabricators are cautioned that some
Retroreflective sheetings, even of the same ASTM “Type” may
not provide consistent luminance for desired night visibility if the
sheeting is not applied in the optimal, or in uniform orientation.
Agencies and fabricators should be aware of this concern and
discuss the potential effects of rotation on luminance of specific
sheetings with their material supplier before beginning installation
and/or fabrication

0750000A1

0750000A2

0750000A3

0750000A4

750000048R