Avery DOL1370Z Luster

Description

Avery DOL1370Z Luster
Avery Dennison
® DOL1300Z Series Clear
Cast Laminates
83 # / Transparent Synthetic (on gloss only)
Revision: 1 Dated: 05/08/19
Uses:
Avery Dennison? DOL 1300Z Series Clear Cast Vinyl is a
premium quality, ultra-thin, ultra-conformable cast vinyl
film designed for use as a protective overlaminate film for
solvent, UV, latex, and screen print inks. DOL 1300Z
Series offers an exceptional value for applications
requiring a variety of finishes, providing excellent
conformability, abrasion resistance, and durability. The
gloss film now features a synthetic liner that creates a
super smooth high gloss finish which provides an overall
paint like finish of printed graphics. DOL 1300Z Series is
designed to be used with MPI 1105 SuperCast Series
print media.
Face: 1.3 mil (32 microns) cast
film
Adhesive: Permanent Acrylic
(clear)
Liner: 83# Kraft coated one side
(on 1370Z & 1380Z)
2 mil Transparent Synthetic (on
1360Z gloss)
Durability: Up to 4 years
Application
Surfaces:
Flat, Flat with Rivets,
Corrugations, Complex Curves
(vehicle wraps)
Features:
? DOL 1360Z, optically clear, high gloss finish
? DOL 1370Z, luster finish
? DOL 1380Z, matte finish
? Protects image from scratches
? Enhances color and depth of image
? Ultra-conformable face
? Outstanding durability and outdoor performance
? Excellent dimensional stability
? ASTM E-84 Type 1 or A rating
Conversion:
? Cold Overlaminating
Common Applications:
? Fleet
? Vehicle
? Marine/ Watercraft
? Backlit
? POP / Trade Show
? Wall Murals
? Window Graphics
? Outdoor Signage
Product Data Sheet
Page 1 of 4
Avery Dennison
® DOL1300Z Series Clear
Cast Laminates
83 # / Transparent Synthetic (on gloss only)
Revision: 1 Dated: 05/08/19
Physical Characteristics:
Property Measurement Typical Values
Caliper, face 1.3 mil (32 µm)
Caliper, adhesive 1.0 mil (25 µm)
Dimensional stability <0.015” (0.4mm) Tensile at Yield 4.0 - 8.0 lb/in (0.7–1.5 kg/cm) Elongation 100% min. Gloss Hunter Gloss @ 60 degrees DOL 1360Z – 90 GU DOL 1370Z – 30 GU DOL 1380Z – 5 GU Adhesion: 15 min 24 hr 3.0 lbs/in (525 N/m) 3.5 lbs/in (613 N/m) Flammability ASTM E-84 Self Extinguishing Class 1 or A rating Shelf-Life 2 years from the date of manufacture (when stored at the following temperatures and humidity conditions 68°-77° F (20° - 25° C) and 50±5% R. H.) Durability Vertical Exposure Up to 4 years see ICS Performance Guarantee for printer specific durability Min. Application Temperature 40° F (4° C) Service Temperature -40° to 180°F (-40° to 82° C) (Reasonable range of temperatures which would be expected under normal environmental conditions). Chemical resistance Resistant to most mild acids, alkalis, and salt solutions including water. Resists Petroleum Vapors Compliance California Proposition 65 Data represents average values where applicable, and is not intended for specification purposes. Product Data Sheet Page 2 of 4 Avery Dennison ® DOL1300Z Series Clear Cast Laminates 83 # / Transparent Synthetic (on gloss only) Revision: 1 Dated: 05/08/19 Warranty: This Warranty applies to the Product listed in this Data Sheet. All statements, technical information (including physical and chemical characteristics) and recommendations about Avery Dennison products are based upon tests believed to be reliable but do not constitute a guarantee or warranty. All Avery Dennison products are sold subject to the Purchaser’s assent and agreement that Purchaser is responsible for, and has independently determined, the suitability of such products for its purposes or its customer’s purposes. Avery Dennison products are warranted to be free from defects in material and workmanship (i) for two years from the date of manufacture, or (ii) from the date of manufacture until the expiration of the period stated on the specific Product Data Sheet in effect at the time of delivery.. Such time periods are subject in either case to the proper storing and application of said product, and the failure to properly store or apply the product, including without limitation the failure to follow any applicable Instructional Bulletin, negates any warranty. It is expressly agreed and understood that Avery Dennison's sole obligation and Purchaser's exclusive remedy under this warranty, under any other warranty, express or implied, or otherwise, shall be limited exclusively to: (a) repair or replacement of defective product without charge at Avery Dennison's plant or at the location of the product (at Avery Dennison's election), or (b) in the event repair or replacement are not commercially practical, a credit amount up to the price of the product taking into account the defect in the product in Avery Dennison’s sole discretion. THE WARRANTY EXPRESSLY SET FORTH ABOVE IS IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR ANY PARTICULAR USE AND/OR NON-INFRINGEMENT. SELLER SPECIFICALLY DISCLAIMS AND EXCLUDES ALL OTHER SUCH WARRANTIES. NO WAIVER, ALTERATION, ADDITION OR MODIFICATION OF THE FOREGOING CONDITIONS SHALL BE VALID UNLESS MADE IN WRITING AND MANUALLY SIGNED BY AN OFFICER OF AVERY DENNISON. AVERY DENNISON'S LIABILITY FOR DEFECTIVE PRODUCTS SHALL NOT EXCEED THE PURCHASE PRICE PAID THEREFORE BY PURCHASER AND IN NO EVENT SHALL AVERY DENNISON BE RESPONSIBLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES WHETHER FORESEEABLE OR NOT, CAUSED BY DEFECTS IN SUCH PRODUCT, WHETHER SUCH DAMAGE OCCURS OR IS DISCOVERED BEFORE OR AFTER REPLACEMENT OR CREDIT, AND WHETHER OR NOT SUCH DAMAGE IS CAUSED BY AVERY DENNISON'S NEGLIGENCE. All sales and contracts for sale of Products are subject to Purchaser’s assent and agreement to this Warranty. Avery Dennison hereby objects to any terms or conditions contained in any purchase order or other communication of any kind from the Purchaser that is conflicting, inconsistent or additional to this Agreement. Product Data Sheet Page 3 of 4 Avery Dennison ® DOL1300Z Series Clear Cast Laminates 83 # / Transparent Synthetic (on gloss only) Revision: 1 Dated: 05/08/19 Special Considerations: When overlaminating UV printed graphics: Heat assist and increasing lamination pressure when applying the overlaminate will reduce the silvering that can occur when laminating UV printed graphics. Do not exceed 115° F (46° C) on the top or bottom roll. Roll pressure up to 100 psi may be used. When applying the overlaminate in this manner, use the minimum amount of unwind tension on the overlaminate to reduce stretching during application. Related Documents: The following Avery Dennison ® literature will provide complete information to the user for proper application, storage, and other requirements and is available upon request from your Avery Dennison representative or from the Avery Dennison website (www.graphics.averydennison.com). Document Title Reference Number Substrate Cleaning and Preparation Instructional Bulletin #1.10 Storage, Maintenance, and Cleaning of PVC Films Instructional Bulletin #1.20 Warranty of Films Instructional Bulletin #1.30 Cleaning and Maintenance of Vehicle Wraps Instructional Bulletin #1.50 Tips for Overlaminating, Premasking & Packaging Graphics Instructional Bulletin #5.50 Removal Instructions Instructional Bulletin #4.10 Revisions are italicized Avery Dennison is a registered trademark of Avery Dennison Corporation Product Data Sheet Page 4 of 4 https://graphics.averydennison.com/content/dam/averydennison/graphics/na/en/documents/Product-Data-Sheets-NA-ONLY/DIM/Supercast/MPI-1000/pds-dol-1300z-series.pdf DOL1370Z Luster A115955 DOL1370Z LUSTER PERM KR CLEAR A006162 DOL1370Z LUSTER PERM KR 60X50 YDS 3IN A006163 DOL1370Z LUSTER PERM KR 54X50 YDS 3IN A006164 DOL1370Z LUSTER PERM KR 54X25 YDS 3IN A006165 DOL1370Z LUSTER PERM KR 48X50 YDS 3IN A351715 DOL1370Z LUSTER PERM KR 48X100 YDS 3IN A010529 DOL1370Z LUSTER PERM KR 54X5 YDS DOL1380Z Matte 921167A60R A115955 DOL1370Z LUSTER PERM KR CLEAR 6488 A006162 DOL1370Z LUSTER PERM KR 60X50 YDS 3IN 6489 A006163 DOL1370Z LUSTER PERM KR 54X50 YDS 3IN 6490 A006164 DOL1370Z LUSTER PERM KR 54X25 YDS 3IN 6491 A006165 DOL1370Z LUSTER PERM KR 48X50 YDS 3IN 0 A351715 DOL1370Z LUSTER PERM KR 48X100 YDS 3IN S6492 A010529 DOL1370Z LUSTER PERM KR 54X5 YDS