Avery DOL6040 Sparkle

Description

Avery DOL6040 Sparkle
Avery Dennison
® DOL 6040
Clear Sparkle Laminate
Transparent Synthetic
Revision: 1 Dated: 07/27/17
Uses:
Avery Dennison DOL 6040 Clear Sparkle is a
premium quality, flexible film designed for use as a
protective overlaminate film for screen and digitally
printed decals. DOL 6040 Clear Sparkle provides a
metallic look to standard printed decals. The gloss
film features a synthetic liner that creates a super
smooth high gloss finish.
Face: 3 mil (76 microns) cast film
Adhesive: Permanent Acrylic
(clear)
Liner: 2 mil Transparent Synthetic
Durability: Up to 2 years
Application
Surfaces:
Flat, Simple Curves, and Complex
Curves
*NOTE: Films constructions with thickness 4 mil (102 micron) and above may
have reduced conformability.
Features:
? High gloss finish
? Sparkle in laminate provides metallic finish on printed graphic
? Protects image from scratches
? Enhances color and depth of image
? Good durability and outdoor performance
? Dimensionally stable
? Aids in application of printed graphic
? Excellent UV, temperature, humidity, and salt-spray resistance
Conversion:
? Cold Overlaminating ? Plotter Cut
Common Applications:
? Vehicle
? Marine/ Watercraft
? Wall Murals
? POP/ Tradeshow
? Window Graphics
? Outdoor Signage
Product Data Sheet
Page 1 of 4
Avery Dennison
® DOL 6040
Clear Sparkle Laminate
Transparent Synthetic
Revision: 1 Dated: 07/27/17
Physical Characteristics:
Property Measurement Typical Values
Caliper, face 3 mil (76 µm))
Caliper, adhesive 1.0mil (25 µm)
Dimensional stability <0.015”(0.4mm) Tensile at Yield 4.0 - 8.0 lb/in (0.7–1.5 kg/cm) Elongation 100% min. Gloss Hunter Gloss @ 60 degrees 90 GU Adhesion: 15 min 24 hr 3.0 lbs/in (525 N/m) 4.0 lbs/in (700 N/m) Flammability Self Extinguishing Shelf-Life 2 years from date of manufacture (when stored at the following temperatures and humidity conditions 68°-77° F (20° - 25° C) and 50±5% R. H.) Durability Vertical Exposure Up to 2 years Min. Application Temperature 40° F (4° C) Service Temperature -40° to 180°F (-40° to 82° C) (Reasonable range of temperatures which would be expected under normal environmental conditions). Chemical resistance Resistant to most mild acids, alkalis, and salt solutions including water. Resists Petroleum Vapors Data represents average values where applicable, and is not intended for specification purposes. Product Data Sheet Page 2 of 4 Avery Dennison ® DOL 6040 Clear Sparkle Laminate Transparent Synthetic Revision: 1 Dated: 07/27/17 Warranty: This Warranty applies to the Product listed in this Data Sheet. All statements, technical information (including physical and chemical characteristics) and recommendations about Avery Dennison products are based upon tests believed to be reliable but do not constitute a guarantee or warranty. All Avery Dennison products are sold subject to the Purchaser’s assent and agreement that Purchaser is responsible for, and has independently determined, the suitability of such products for its purposes or its customer’s purposes. Avery Dennison products are warranted to be free from defects in material and workmanship (i) for two years from the date of manufacture, or (ii) from the date of manufacture until the expiration of the period stated on the specific Product Data Sheet in effect at the time of delivery.. Such time periods are subject in either case to the proper storing and application of said product, and the failure to properly store or apply the product, including without limitation the failure to follow any applicable Instructional Bulletin, negates any warranty. It is expressly agreed and understood that Avery Dennison's sole obligation and Purchaser's exclusive remedy under this warranty, under any other warranty, express or implied, or otherwise, shall be limited exclusively to: (a) repair or replacement of defective product without charge at Avery Dennison's plant or at the location of the product (at Avery Dennison's election), or (b) in the event repair or replacement are not commercially practical, a credit amount up to the price of the product taking into account the defect in the product in Avery Dennison’s sole discretion. THE WARRANTY EXPRESSLY SET FORTH ABOVE IS IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR ANY PARTICULAR USE AND/OR NON-INFRINGEMENT. SELLER SPECIFICALLY DISCLAIMS AND EXCLUDES ALL OTHER SUCH WARRANTIES. NO WAIVER, ALTERATION, ADDITION OR MODIFICATION OF THE FOREGOING CONDITIONS SHALL BE VALID UNLESS MADE IN WRITING AND MANUALLY SIGNED BY AN OFFICER OF AVERY DENNISON. AVERY DENNISON'S LIABILITY FOR DEFECTIVE PRODUCTS SHALL NOT EXCEED THE PURCHASE PRICE PAID THEREFORE BY PURCHASER AND IN NO EVENT SHALL AVERY DENNISON BE RESPONSIBLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES WHETHER FORESEEABLE OR NOT, CAUSED BY DEFECTS IN SUCH PRODUCT, WHETHER SUCH DAMAGE OCCURS OR IS DISCOVERED BEFORE OR AFTER REPLACEMENT OR CREDIT, AND WHETHER OR NOT SUCH DAMAGE IS CAUSED BY AVERY DENNISON'S NEGLIGENCE. All sales and contracts for sale of Products are subject to Purchaser’s assent and agreement to this Warranty. Avery Dennison hereby objects to any terms or conditions contained in any purchase order or other communication of any kind from the Purchaser that is conflicting, inconsistent or additional to this Agreement. Special Considerations: When overlaminating UV printed graphics: Heat assist and increasing lamination pressure when applying the overlaminate will reduce the silvering that can occur when laminating UV printed graphics. Do not exceed 115° F (46° C) on the top or bottom roll. Roll pressure up to 100 psi may be used. When applying the overlaminate in this manner, use the minimum amount of unwind tension on the overlaminate to reduce stretching during application. Product Data Sheet Page 3 of 4 Avery Dennison ® DOL 6040 Clear Sparkle Laminate Transparent Synthetic Revision: 1 Dated: 07/27/17 Related Documents: The following Avery Dennison ® literature will provide complete information to the user for proper application, storage, and other requirements and is available upon request from your Avery Dennison representative or from the Avery Dennison website (www.graphics.averydennison.com). Document Title Reference Number Substrate Cleaning and Preparation Instructional Bulletin #1.10 Storage, Maintenance, and Cleaning of PVC Films Instructional Bulletin #1.20 Warranty of Films Instructional Bulletin #1.30 Cleaning and Maintenance of Vehicle Wraps Instructional Bulletin #1.50 Tips for Overlaminating, Premasking & Packaging Graphics Instructional Bulletin #5.50 Removal Instructions Instructional Bulletin #4.10 Revisions are italicized Avery Dennison is a registered trademark of Avery Dennison Corporation Product Data Sheet Page 4 of 4 https://graphics.averydennison.com/content/dam/averydennison/graphics/na/en/documents/Product-Data-Sheets-NA-ONLY/DOL/specialty/DOL-6000/pds-dol-6040.pdf DOL6040 Sparkle A114978 DOL6040 SPARKLE PERM PET 54" A114676 DOL6040 SPARKLE PERM PET 60" A005753 DOL6040 SPARKLE PERM PET 54X50 YDS 3IN A005754 DOL6040 SPARKLE PERM PET 60X50 YDS 3IN A010517 DOL6040 SPARKLE PERM PET 54X5 0 0 DOL6040 Sparkle 0 0 A114978 DOL6040 SPARKLE PERM PET 54" 919167160R A114676 DOL6040 SPARKLE PERM PET 60" 6319 A005753 DOL6040 SPARKLE PERM PET 54X50 YDS 3IN 6320 A005754 DOL6040 SPARKLE PERM PET 60X50 YDS 3IN 0 A010517 DOL6040 SPARKLE PERM PET 54X5