Avery MPI2630 Textured Wall Film HITAC SF

Description

Avery MPI2630 Textured Wall Film HITAC SF
AVERY MPI MPI2636 CANVAS HITAC

Avery Dennison® MPI 2636 Series Wall Films
Textured White Polymeric Calendered Vinyl Hi-Tack
Features

Flexible textured white high performance polymeric calendered vinyl face film
designed for internal graphics
A thick face film construction that provides added stability reducing
application time and edge curl from solvent inkjet inks
Special Hi-tack adhesives enables suitability for applications with slightly
structured surfaces and apolar substrates, including interior walls
Premium film with excellent printability across a range of technology and inks
Two side PE coated StaFlat™ liner provides easy converting properties
Suitable for most walls – tested and recommended for use over many kinds of
paints including high gloss, semi-gloss and satin paints
Meets ASTM E84-04, Standard test method for surface burning characteristics
of building materials, Class A rated
Description
Film: 152-203 micron
textured white polymeric
calendered vinyl
Textures: Canvas, Stone &
Stucco
Adhesive: Special Hi-Tack
Permanent Acrylic
Backing: Two side PE coated
Staflat™ paper
Outdoor life**: Up to 4 years
(unprinted)
Application surface: Flat
Common Applications
•
•
•
•
•
•
Internal wall graphics
Retail wall graphics
Wall decorations
Exhibition wall graphics
Internal window graphics
Indoor advertising
Conversion+
Flat bed cutters Cold overlaminating
Friction fed cutters Electrostatic printing
Die cutting Latex inkjet
Thermal transfer Eco solvent inkjet
Screen printing Solvent inkjet
Offset printing UV curable inkjet
+
Always test with your combination of printer and inks prior to commercial use.
Applications
For processing tips and reference guides please refer to Avery Dennison Instructional Bulletins:
• 1.6 Printing, Processing and Application of Interior Wall Graphics
• 1.61 Overview of Interior Wall Graphics Applications
• 4.14 Printing and Finishing of Solvent Inkjet Graphics
Uses
Avery Dennison MPI 2636 Textured Wall Film Hi-Tack series is a tough, scuffresistant, flexible, white premium calendered vinyl film designed specifically
for wall graphic applications. It comes with a choice of three different
textures: Canvas, Stone and Stucco, and is designed specifically for wall
graphic applications where good dimensional stability after application,
adhesion to apolar and slightly rough substrates, and excellent print quality
are required.
Avery Dennison Graphics Solutions Asia Pacific
www.graphicsap.averydennison.com
General
Calliper, face film ISO 534 152 micron (Canvas)
152 micron (Stucco)
203 micron (Stone)
Calliper, face film & adhesive ISO 534 177 micron (Canvas)
177 micron (Stucco)
228 micron (Stone)
Dimensional stability DIN 30646 < 1.0mm Gloss Hunter Gloss @ 60 4 GU Adhesion, initial FINAT FTM-1, stainless steel 350 N/m Adhesion, ultimate FINAT FTM-1, stainless steel 750 N/m Removability ^^ Smooth sound painted surfaces None Flammability Meets ASTM E84-04, Standard Test Method for Surface Burning Characteristics of Building Materials, Class A Rated Self extinguishing Shelf life Stored at 20-25° C / 45-55 % RH 2 years Durability ** Vertical exposure ^ Up to 4 years (unprinted) ^ See ICS Performance Guarantee Durability Bulletin for your specific printer and ink combination for further information ^^ Not removable when applied to nitrocellulose paints, fresh screenprint inks, ABS, polystyrene & certain types of PVC. Thermal Application temperature Minimum: + 10o C Temperature range – 40o C to + 82o C Chemical Resistant to most mild acids, alkalies and salts Note: Materials have to be properly dried of solvents before further processing, like laminating, varnishing, trimming, contour cutting or application. The residual solvents can otherwise change the products’ specific features and properties. Important Information on physical characteristics is based upon tests we believe to be reliable. The values listed herein are typical values and are not for use in specifications. They are intended only as a source of information and are given without guarantee and do not constitute a warranty. Purchasers should independently determine, prior to use, the suitability of any material for their specific use. All technical data is subject to change without prior notice. Warranty Avery Dennison® materials are manufactured under careful quality control and are warranted to be free from defect in material and workmanship. Any material shown to our satisfaction to be defective at the time of sale will be replaced without charge. Our aggregate liability to the purchaser shall in no circumstances exceed the cost of the defective materials supplied. No salesman, representative or agent is authorised to give guarantee, warranty, or make any representation contrary to the foregoing. All Avery Dennison® materials are sold subject to the above conditions, being part of our standard conditions of sale, a copy of which is available on request. **Expected Durability The expected durability of Avery Dennison films are defined as the expected performance life of the Avery Dennison graphic film(s) within Zone 1 of the Avery Dennison zone system, in outdoor vertical exposure conditions. The actual performance life will depend on a variety of factors, including selection and preparation of substrate, angle and direction of exposure, application methods, environmental conditions and cleaning/maintenance of the films. In case of films used in areas of high temperatures or humidity, high altitudes and industrially polluted areas the performance will be further reduced. Expected Durability and Warranted Period Definitions Expected durability is the expected period of time defined in the product data sheet, the product should, but is not warranted to, perform satisfactorily when applied in vertical exposure conditions as defined in Instructional Bulletin 1.30. The warranted period as defined in the appropriate ICS Performance Guarantee Bulletin, is the maximum period of time Avery Dennison will warrant the finished products performance in accordance with ICS Performance Guarantee Terms and Conditions 1.0, provided that the film is properly stored, converted and installed in accordance with Avery Dennison guidelines. Dimensional stability: Is measured on a 150 x 150 mm aluminium panel to which a specimen has been applied; 72 hours after application the panel is exposed for 48 hours to + 70°C, after which the shrinkage is measured. Adhesion: (FTM-1, FINAT) is measured by peeling a specimen at a 180° angle from a stainless steel or float glass panel, 24 hours after the specimen has been applied under standardised conditions. Initial adhesion is measured 20 minutes after application of the specimen. Flammability: A specimen applied to aluminium is subjected to the flame of a gas burner for 15 seconds. The film should stop burning within 15 seconds after removal from the flame. Temperature range: A specimen applied to stainless steel is exposed at high and low temperatures and brought back to room temperature. 1 hour after exposure the specimen is examined for any deterioration. Note: Prolonged exposure to high and low temperatures in the presence of chemicals such as solvents, acids, dyes, etc. may eventually cause deterioration. Chemical Resistance: All chemical tests are conducted with test panels to which a specimen has been applied. 72 hours after application the panels are immersed in the test fluid for the given test period. 1 hour after removing the panel from the fluid, the specimen is examined for any deterioration. Corrosion Resistance: A specimen applied to aluminium is exposed to saline mist (5% salt) at 35ºC. After exposure, the film is removed and the panel is examined for traces of corrosion. Test Methods Avery Dennison® MPI 2636 Textured Wall Film Hi-Tack Rev. 0 (May 2016) A111098 MPI2630 CANVAS HITAC 54" A111100 MPI2630 CANVAS HITAC 60" A006080 MPI2630 CANVAS HITAC 54" x 25yd A005953 MPI2630 CANVAS HITAC 54" x 50 yd A006081 MPI2630 CANVAS HITAC 60" x 25 yd 0 A111098 MPI2630 CANVAS HITAC 54" 0 A111100 MPI2630 CANVAS HITAC 60" 0 A006080 MPI2630 CANVAS HITAC 54" x 25yd 0 A005953 MPI2630 CANVAS HITAC 54" x 50 yd 0 A006081 MPI2630 CANVAS HITAC 60" x 25 yd