Avery MPI2631 Textured Wall Film REMOVABLE

Description

Avery MPI2631 Textured Wall Film REMOVABLE
Avery Dennison® MPI 2631 Series Wall Films
Textured White Polymeric Calendered Vinyl Removable
Features
•
•
•
•
•
•
•
•
Flexible textured white high performance polymeric calendered vinyl face film
designed for internal graphics
A thick face film construction that provides added stability reducing application
time and edge curl from solvent inkjet inks
Superior adhesive technology that meets the demanding requirements of most
wall surfaces
Premium film with excellent printability across a range of technology and inks
Two side PE coated StaFlat™ liner provides easy converting properties
Suitable for most walls – tested and recommended for use over many kinds of
paints including high gloss, semi-gloss and satin paints
Easy and clean removability with heat for up to 1 year from smooth sound paint
Meets ASTM E84-04, Standard test method for surface burning characteristics of
building materials, Class A rated
Description
Film: 152-203 micron
textured white polymeric
calendered vinyl
Textures: Canvas, Stone &
Stucco
Adhesive: Clear removable
acrylic
Removability: up to 1 year
Backing: Two side PE coated
Staflat™ paper
Outdoor life**: Up to 4 years
(unprinted)
Application surface: Flat
Common Applications
•
•
•
•
•
•
Internal wall graphics
Retail wall graphics
Wall decorations
Exhibition wall graphics
Internal window graphics
Indoor advertising
Conversion+

Flat bed cutters Cold overlaminating
Friction fed cutters Electrostatic printing
Die cutting Latex inkjet
Thermal transfer Eco solvent inkjet
Screen printing Solvent inkjet
Offset printing UV curable inkjet
+
Always test with your combination of printer and inks prior to commercial use.
Applications
For processing tips and reference guides please refer to Avery Dennison Instructional Bulletins:
• 1.6 Printing, Processing and Application of Interior Wall Graphics
• 1.61 Overview of Interior Wall Graphics Applications
• 4.14 Printing and Finishing of Solvent Inkjet Graphics
Uses
Avery Dennison MPI 2631 Textured Wall Film Removable series is a tough,
scuff-resistant, flexible, white premium calendered vinyl film designed
specifically for wall graphic applications. It comes with a choice of three
different textures: Canvas, Stone and Stucco, and is designed specifically for
wall graphic applications where good dimensional stability after application,
removability and excellent print quality are required.
Avery Dennison Graphics Solutions Asia Pacific
www.graphicsap.averydennison.com
Thermal
Application temperature Minimum: + 10o
C
Temperature range – 40o
C to + 82o
C
Chemical
Resistant to most mild acids, alkalies and salts
General
Calliper, face film ISO 534 152 micron (Canvas)
152 micron (Stucco)
203 micron (Stone)
Calliper, face film & adhesive ISO 534 177 micron (Canvas)
177 micron (Stucco)
228 micron (Stone)
Dimensional stability DIN 30646 < 1.651mm
Gloss Hunter Gloss @ 60 4 GU
Adhesion, initial FINAT FTM-1, stainless steel 175 N/m
Adhesion, ultimate FINAT FTM-1, stainless steel 262 N/m
Removability ^^ Smooth sound painted surfaces Up to 1 year
Flammability ASTM E84-04
AS/NZS 3837:1998
ISO 5660-1:2002
Class A
Group 1
Group 1
Shelf life Stored at 20-25° C / 45-55 % RH 2 years
Durability ** Vertical exposure ^ Up to 4 years (unprinted)
^ See ICS Performance Guarantee Durability Bulletin for your
specific printer and ink combination for further information
^^ Not removable when applied to nitrocellulose paints, fresh
screenprint inks, ABS, polystyrene & certain types of PVC.
Note:
Materials have to be properly dried of solvents before further processing, like
laminating, varnishing, trimming, contour cutting or application. The residual
solvents can otherwise change the products’ specific features and properties.
Important
Information on physical characteristics is based
upon tests we believe to be reliable. The values
listed herein are typical values and are not for use
in specifications.
They are intended only as a source of information
and are given without guarantee and do not
constitute a warranty. Purchasers should
independently determine, prior to use, the
suitability of any material for their specific use.
All technical data is subject to change without
prior notice.
Warranty
Avery Dennison® materials are manufactured
under careful quality control and are warranted to
be free from defect in material and workmanship.
Any material shown to our satisfaction to be
defective at the time of sale will be replaced
without charge. Our aggregate liability to the
purchaser shall in no circumstances exceed the
cost of the defective materials supplied. No
salesman, representative or agent is authorised
to give guarantee, warranty, or make any
representation contrary to the foregoing.
All Avery Dennison® materials are sold subject to
the above conditions, being part of our
standard conditions of sale, a copy of which is
available on request.
**Expected Durability
The expected durability of Avery Dennison films
are defined as the expected performance life of
the Avery Dennison graphic film(s) within Zone 1
of the Avery Dennison zone system, in outdoor
vertical exposure conditions.
The actual performance life will depend on a
variety of factors, including selection and
preparation of substrate, angle and direction of
exposure, application methods, environmental
conditions and cleaning/maintenance of the films.
In case of films used in areas of high
temperatures or humidity, high altitudes and
industrially polluted areas the performance will be
further reduced.
Expected Durability and Warranted Period
Definitions
Expected durability is the expected period of
time defined in the product data sheet, the
product should, but is not warranted to, perform
satisfactorily when applied in vertical exposure
conditions as defined in Instructional Bulletin
1.30. The warranted period as defined in the
appropriate ICS Performance Guarantee Bulletin,
is the maximum period of time Avery Dennison
will warrant the finished products performance in
accordance with ICS Performance Guarantee
Terms and Conditions 1.0, provided that the film
is properly stored, converted and installed in
accordance with Avery Dennison guidelines.
Dimensional stability:
Is measured on a 150 x 150 mm aluminium panel to
which a specimen has been applied; 72 hours after
application the panel is exposed for 48 hours to + 70°C,
after which the shrinkage is measured.
Adhesion:
(FTM-1, FINAT) is measured by peeling a specimen at a
180° angle from a stainless steel or float glass panel, 24
hours after the specimen has been applied under
standardised conditions. Initial adhesion is measured 20
minutes after application of the specimen.
Flammability:
A specimen applied to aluminium is subjected to the
flame of a gas burner for 15 seconds. The film should
stop burning within 15 seconds after removal from the
flame.
Temperature range:
A specimen applied to stainless steel is exposed at high
and low temperatures and brought back to room
temperature. 1 hour after exposure the specimen is
examined for any deterioration. Note: Prolonged
exposure to high and low temperatures in the presence of
chemicals such as solvents, acids, dyes, etc. may
eventually cause deterioration.
Chemical Resistance:
All chemical tests are conducted with test panels to which
a specimen has been applied. 72 hours after application
the panels are immersed in the test fluid for the given test
period. 1 hour after removing the panel from the fluid, the
specimen is examined for any deterioration.
Corrosion Resistance:
A specimen applied to aluminium is exposed to saline
mist (5% salt) at 35ºC. After exposure, the film is removed
and the panel is examined for traces of corrosion.
Test Methods
Avery Dennison® MPI 2631 Textured Wall Film Removable Rev. 1 (Jan 2018)
https://graphicsap.averydennison.com/content/dam/averydennison/graphics/ap/en/Product-Data-Sheets/january-2018/Avery_Dennison_MPI_2631_Series_Wall_Films_PDS_Rev_1.pdf
A112838 MPI2631 CANVAS
A112840 MPI2631 CANVAS
A006040 MPI2631 CANVAS 54X25 YDS 3IN
A006041 MPI2631 CANVAS 60X25 YDS 3IN

321937154R A112838 MPI2631 CANVAS 0
0 A112840 MPI2631 CANVAS 0
6413 A006040 MPI2631 CANVAS 54X25 YDS 3IN
6414 A006041 MPI2631 CANVAS 60X25 YDS 3IN