Avery MPI3322 Matte Promotional Grey Removable

Description

Avery MPI3322 Matte Promotional Grey Removable
Avery Dennison
® MPI 3320 / 3322 / 3323
Matte Calendered
Permanent / Removable Kraft
Revision: 3 Dated: 09/04/19
Uses:
Avery Dennison MPI 3320 Matte Series are tough,
scuff-resistant, flexible white promotional calendered
vinyl films that deliver consistent print images at an
exceptional value. Avery Dennison MPI 3320 and 3323
Matte feature a clear and gray permanent adhesive
designed for short to medium term promotional graphics
while the MPI 3322 offers a gray adhesive for
promotional applications requiring removable adhesive
performance. These films are well suited for applications
such as Point-of-Purchase, Product Identification Labels,
as well as Outdoor and General Signage.
Face: 3.4 mil (86 microns) matte
Adhesive: Acrylic
MPI 3320 – Permanent (clear)
MPI 3322 – Removable (gray)
MPI 3323 – Permanent (gray)
Liner: Clay-Coated Kraft
Application
Surfaces:
Flat, simple curves (restricted to
non-spill areas)
Features:
? Consistent printability
? Great image clarity and color pop
? Opaque
? ICC profiles available on Avery Dennison’s website (https://avery-us.color-base.com)
Conversion
? Solvent based inkjet
? Mild/Eco Solvent Inkjet
? Latex Inkjet
? UV Inkjet
Note: Product is not recommended for use on drum digital printers or sheet-fed conversion.
Common Applications:
? Wall Murals
? POP/ Tradeshow
? Outdoor Signage
? Floor Graphics
Product Data Sheet
Page 1 of 4
Avery Dennison
® MPI 3320 / 3322 / 3323
Matte Calendered
Permanent / Removable Kraft
Revision: 3 Dated: 09/04/19
Physical Characteristics:
Property Measurement Typical Value
Caliper, face
3.4 mil (97 µm)
Caliper, adhesive 1.0mil (25 µm)
Dimensional stability <0.030”(0.762 mm) Note: Ink loads in excess of 250% may cause increased shrinkage and/or increased initial adhesion of the printed film Tensile at Yield Elongation Gloss Hunter Gloss @ 60 degrees 55 ±10 Adhesion: 15 min (permanent 15 min (removable) 24 hr (permanent) 24 hr (removable) 2.5 lb/in (438 N/m) 1.0-2.0 lb/in (175-350 N/m) 3.9 lb/in (683 N/m) 1.5-3.0 lb/in (263-525 N/m) Removability MPI 3322 1 year from most substrates. Surface must be sealed. Flammability Self Extinguishing Shelf-Life 2 years from date of manufacture (when stored at the following temperatures and humidity conditions 68°-77° F (20° - 25° C) and 50±5% R. H.) Durability Vertical Exposure Unprinted – 4 years Printed – Up to 3 years Min. Application Temperature 50° F (10° C) Service Temperature -40° to 180°F (-40° to 82° C) (Reasonable range of temperatures which would be expected under normal environmental conditions) Chemical resistance Resistant to most mild acids, alkalis, and salt solutions Product Data Sheet Page 2 of 4 Avery Dennison ® MPI 3320 / 3322 / 3323 Matte Calendered Permanent / Removable Kraft Revision: 3 Dated: 09/04/19 Data represents average values where applicable, and is not intended for specification purposes. Warranty: This Warranty applies to the Product listed in this Data Sheet. All statements, technical information (including physical and chemical characteristics) and recommendations about Avery Dennison products are based upon tests believed to be reliable but do not constitute a guarantee or warranty. All Avery Dennison products are sold subject to the Purchaser’s assent and agreement that Purchaser is responsible for, and has independently determined, the suitability of such products for its purposes or its customer’s purposes. Avery Dennison products are warranted to be free from defects in material and workmanship (i) for two years from the date of manufacture, or (ii) from the date of manufacture until the expiration of the period stated on the specific Product Data Sheet in effect at the time of delivery.. Such time periods are subject in either case to the proper storing and application of said product, and the failure to properly store or apply the product, including without limitation the failure to follow any applicable Instructional Bulletin, negates any warranty. It is expressly agreed and understood that Avery Dennison's sole obligation and Purchaser's exclusive remedy under this warranty, under any other warranty, express or implied, or otherwise, shall be limited exclusively to: (a) repair or replacement of defective product without charge at Avery Dennison's plant or at the location of the product (at Avery Dennison's election), or (b) in the event repair or replacement are not commercially practical, a credit amount up to the price of the product taking into account the defect in the product in Avery Dennison’s sole discretion. THE WARRANTY EXPRESSLY SET FORTH ABOVE IS IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR ANY PARTICULAR USE AND/OR NON-INFRINGEMENT. SELLER SPECIFICALLY DISCLAIMS AND EXCLUDES ALL OTHER SUCH WARRANTIES. NO WAIVER, ALTERATION, ADDITION OR MODIFICATION OF THE FOREGOING CONDITIONS SHALL BE VALID UNLESS MADE IN WRITING AND MANUALLY SIGNED BY AN OFFICER OF AVERY DENNISON. AVERY DENNISON'S LIABILITY FOR DEFECTIVE PRODUCTS SHALL NOT EXCEED THE PURCHASE PRICE PAID THEREFORE BY PURCHASER AND IN NO EVENT SHALL AVERY DENNISON BE RESPONSIBLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES WHETHER FORESEEABLE OR NOT, CAUSED BY DEFECTS IN SUCH PRODUCT, WHETHER SUCH DAMAGE OCCURS OR IS DISCOVERED BEFORE OR AFTER REPLACEMENT OR CREDIT, AND WHETHER OR NOT SUCH DAMAGE IS CAUSED BY AVERY DENNISON'S NEGLIGENCE. All sales and contracts for sale of Products are subject to Purchaser’s assent and agreement to this Warranty. Avery Dennison hereby objects to any terms or conditions contained in any purchase order or other communication of any kind from the Purchaser that is conflicting, inconsistent or additional to this Agreement. Revisions are italicized Patent Registration: US6,630,049, US7,060,351, US7,344,618, EP1276605, EP1282472 Avery Dennison ® is a registered trademark of Avery Dennison Corporation Easy Apply™ is a trademark of Avery Dennison Corporation Product Data Sheet Page 3 of 4 Avery Dennison ® MPI 3320 / 3322 / 3323 Matte Calendered Permanent / Removable Kraft Revision: 3 Dated: 09/04/19 Removability: Avery Dennison does not guarantee removability from the following substrates: ? Surfaces with poor paint-to-substrate adhesion ? Wallboard ? Existing graphics that must remain intact; damage to existing graphic when film is removed ? Aged paint or metal that may have surface oxidation or chalking ? Outdoor, horizontal surfaces Product Data Sheet Page 4 of 4 A113794 MPI3322 MATTE GREM CCK 54" A113796 MPI3322 MATTE GREM CCK 60" A003977 MPI3322 MATTE GREM CCK 60X50 YDS 3IN A003980 MPI3322 MATTE GREM CCK 60X100 YDS 3IN A003986 MPI3322 MATTE GREM CCK 60X250 YDS 3IN A003966 MPI3322 MATTE GREM CCK 54X50 YDS 3IN A003970 MPI3322 MATTE GREM CCK 54X100 YDS 3IN A003937 MPI3322 MATTE GREM CCK 30X50 YDS 3IN A010506 MPI3322 MATTE GREM CCK 54X5 320247A54R A113794 MPI3322 MATTE GREM CCK 54" 0 A113796 MPI3322 MATTE GREM CCK 60" 5283 A003977 MPI3322 MATTE GREM CCK 60X50 YDS 3IN 5284 A003980 MPI3322 MATTE GREM CCK 60X100 YDS 3IN 0 A003986 MPI3322 MATTE GREM CCK 60X250 YDS 3IN 5281 A003966 MPI3322 MATTE GREM CCK 54X50 YDS 3IN 5282 A003970 MPI3322 MATTE GREM CCK 54X100 YDS 3IN 5248 A003937 MPI3322 MATTE GREM CCK 30X50 YDS 3IN 0 A010506 MPI3322 MATTE GREM CCK 54X5