Avery T-11500 yellow Retroreflective Sheeting Type XI Full-Cube Prismatic

Description

Avery T-11500 yellow  Retroreflective Sheeting Type XI Full-Cube Prismatic

Avery Dennison OmniCube

TM T-11000 Microprismatic Retroreflective Film takes full-cube reflective sheeting to a new level. OmniCube
full-cube prisms are 100% efficient – returning approximately 60% of the available light back to the driver compared to only 40% with other
prismatic reflective sheetings. OmniCube’s Intelligent Cube Technology incorporates the needs of all vehicle types; trucks, SUVs,
automobiles, and motorcycles into one reflective sheeting.
OmniCube T-11000 is an OmniDirectional microprismatic film that incorporates tiles of full-cube microprisms arranged in multiple
orientations and passes the AASHTO specification requirement for rotationally insensitive sheeting. This feature – “Smart at Every Angle”
benefits agencies by providing confidence that all signs will perform with uniform visual reflectivity at all sign face orientations.

 

Availability
Series/Color TrafficJet Printable (Y/N) Series/Color TrafficJet Printable (Y/N)
T-11500 White Y T-11508 Red N
T-11501 Yellow Y T-11509 Brown N
T-11505 Blue N T-11511 Fluorescent Yellow Y
T-11507 Green N T-11513 Fluorescent Yellow Green Y
Performance
International ASTM D4956 Type IX, XI
Argentina IRAM 3952 Japan JIS Z9117
Australia, New Zealand AS/NZS 1906.1 Class 1100 Korea KS T:3507, Type XI
Belgium PTV662 3A White/Yellow/FL Yellow Mexico
NOM-034-SCT2/SEDATU-20
22
Brazil ABNT 14644 Tipo X
China GB/T 18833 Type V South Africa SANS 1519-1 Type V
Europe Class 3 Full Cube Spain UNE 135340 RA3-ZC
France NF XP9B-502 Class 3 United Kingdom EN12899/1 Class R3C
Avery Dennison recommends the user obtain the current requirements from their local governing agency to ensure product conformance

Avery Dennison OmniCube™ Series sheeting is limited to properly prepared substrates which differ by product. For T-115XX products,
application is limited to properly prepared aluminum. Users are urged to carefully evaluate, under actual use conditions, any sheeting
application to other substrates. Failure caused by other substrates, materials, contamination, or improper surface preparation is not the
responsibility of Avery Dennison. Please refer to Instructional Bulletins for full details of substrate requirements.

 

PERFORMANCE WARRANTY
If within twelve (12) years from the initial date of installation, the Product deteriorates due to natural causes to the extent that: 1) the Product fails to retain the
minimum reflectivity values warranted for the twelve (12) year period under the standard in force at the time of installation, or 2) the Product is ineffective for its
intended purpose when viewed from a moving vehicle under normal daytime or nighttime driving conditions, Avery Dennison will furnish a replacement amount
of like Product at no cost to enable the installed surface to be restored to its original effectiveness. If within seven (7) years of installation such deterioration
occurs or the Product fails to retain the minimum seven (7) year reflectivity values, Avery Dennison will restore the installation surface to its original effectiveness
at no cost for materials or labor.
CONDITIONS
This warranty shall be effective only if all of the following conditions are met:
Fabrication and/or installation must occur within one (1) year from the date of purchase.
The failure must have resulted solely from a manufacturing defect or deterioration of the Product due to natural causes under the Performance Warranty.
Without limiting the generality of the foregoing, there is no warranty for the failure of the sheeting due to improper sign fabrication, storage, handling,
installation, maintenance, failure of the sign substrate, vandalism or mischief. Slight color fading, cracking, chalking, edge lifting, or slight reduction in gloss or
reflectivity will not materially detract from appearance and does not constitute a breach of warranty.
Avery Dennison has published instructional bulletins pertaining to the storage, handling, and cleaning of Product, approved substrates, and application
procedures (collectively, the “Procedures”). The Product must have been processed and applied to blank, clean material in accordance with the Procedures, as
such may be amended from time to time. Avery Dennison reserves the right to reject any warranty claim where the fabricator or installer cannot satisfactorily
prove or demonstrate that the Avery Dennison procedures were utilized. The date of installation, warranty registration, and claim procedures established by
Avery Dennison must be followed, and failure to follow such procedures shall void this warranty. Replacement Product carries only the unexpired warranty
portion of the Product it replaces. The Product must be properly stored and applied within the shelf-life as stated in the applicable Avery Dennison Product Data
Sheet including adhesive and other material product data sheets.
ADDITIONAL LIMITATIONS
Unintended Use: This warranty only applies to Product that is used by professional converters and installers for the defined end uses and in the combinations
described in the applicable Avery Dennison Product Data Sheets and Instructional Bulletins. For any other use, the user is responsible for determining the
suitability of the Product, and for any and all risk or liability associated with that use or application, and the user agrees to indemnify, defend and hold harmless
Avery Dennison for any claims, losses, damages, judgments, expenses and/or expenses, including attorneys fees, resulting from such use or application. This
warranty is expressly conditioned on the Product being processed by professional converters or installers in accordance with the Avery Dennison recommended
written processing instructions, and being applied to properly prepared surfaces and cleaned and maintained in accordance with recommended Avery Dennison
procedures. It is the converters, installers or other users responsibility to perform incoming raw material quality inspections, to assure proper surface preparation
and that approved application procedures are followed, to retain converted samples, and to immediately cease using and notify Avery Dennison and/or its
authorized agent or distributor of any Product, Materials and/or finished Product discovered to be (or reasonably capable of being discovered to be) defective.
Misuse and Force Majeure: Avery Dennison has no obligations or liability under this warranty with respect to Product that has been altered, modified, damaged,
misused, abused, subject to accident, neglected or otherwise mishandled or improperly processed or installed. Product is not warranted against premature
failure caused by chemical, environmental or mechanical means such as, but not limited to, vandalism, cleaning solutions, paints, solvents, moisture, temperature,
mechanical washing equipment, engine fuel spills, engine exhaust, steam, organic solvents or other spilled chemicals pollutants, including industrial and volcanic
ash. Damage from fire, structural failure, lightning, accidents, and other force majeure events are not covered by this warranty.
Third Party Product: Avery Dennison assumes no responsibility for any injury, loss or damage arising out of the use of a product that is not of our manufacture.
Where installer or converter uses or reference is made to a commercially available product, made by another manufacturer, it shall be the responsibility of the
user, installer or converter to ascertain the precautionary measures for its use outlined by the manufacturer.
The remedies provided under this warranty are exclusive. In no event shall Avery Dennison be responsible for any direct, indirect, incidental or consequential
damages or specific relief whether foreseeable or not, caused by defects in such Product, whether such damage occurs or is discovered before or after
replacement or credit, and whether or not such damage is caused by Avery Dennison’s negligence. In no event shall Avery Dennison’s liability hereunder exceed
the remedies specifically set forth in this warranty. Avery Dennison’s liability shall be limited, at Avery Dennison’s option, to the purchase price, replacement of
the defective Product and in some cases when authorized by Avery Dennison the repair and replacement of the defective Product. THIS WARRANTY IS GIVEN
IN LIEU OF ALL OTHERS. ANY AND ALL OTHER WARRANTIES, WHETHER EXPRESS OR IMPLIED, INCLUDING IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED.NO WAIVER, ALTERATION, ADDITION OR MODIFICATION
OF THE FOREGOING CONDITIONS SHALL BE VALID UNLESS MADE IN WRITING AND MANUALLY SIGNED BY AN OFFICER OF AVERY DENNISON.
DEFINITIONS
Durability: means that the Product in a finished graphic, panel or sign situated outdoors, subject to the limitations herein and Avery Dennison Product Data
Sheets and Instructional Bulletins, and applied to recommended surfaces, will not deteriorate excessively such that the finished sign, panel or graphic is
ineffective for its identification when viewed under normal conditions from the intended viewing distance.
Outdoor Durability: is based on normal middle European and central North American outdoor exposure conditions and application to recommended surfaces.
Actual performance life will depend on a variety of factors, including but not limited to substrate preparation, exposure conditions and maintenance of the
Product and finished graphic, panel or sign. In case the finished graphics, panel or sign is in areas of high temperatures or humidity, in industrially polluted areas
or other areas with air laden particulate matter, and/or in high altitudes, Outdoor Durability may be reduced. Please see your local Avery Dennison representative
for changes to warranties based on such localized conditions.
Vertical Exposure: means that the face of the finished graphic is ±10° from vertical.

1150100A1

1150100A2

1150100A3

1150100A4

1150100A5

1150100A8

1150100A9

1150100AA

1150100AC

1150100AE

1150100AS

1150100AF

115000048R